N-FAB Nerf Bars
#1
#5
RE: N-FAB Nerf Bars
They were definately more expensive than others out there but they don't even compare to the standard style steps; I feel like I got what I paid for thats for sure.They are so sturdy & look a whole lot better than the other styles I have seen & they came with a 5 year warranty on the finish (could'nt beat that).
I think if you spend the money you will be as happy with them as I am.
[IMG]local://upfiles/84833/BC3743A4A67748F59BB86F86C9611A33.jpg[/IMG]
I think if you spend the money you will be as happy with them as I am.
[IMG]local://upfiles/84833/BC3743A4A67748F59BB86F86C9611A33.jpg[/IMG]
#7
Trending Topics
#9
RE: N-FAB Nerf Bars
ORIGINAL: lecmoto
Not sure you would want to do that since I heard they are a Patended design by N-FAB; thats why they are the only ones out there with them.
Not sure you would want to do that since I heard they are a Patended design by N-FAB; thats why they are the only ones out there with them.
The reason I doubt it's patented is Go Rhino also makes some nerf bars like N-Fabs. Theirs are SS though and cost a little more. If I had it to do over again, I'd go with the Go Rhino bars because of that. Mine aren't rusting but, as soon as you lose any powder coating, they will !
#10
RE: N-FAB Nerf Bars
I pulled this from their website (www.n-fab.com) that says it is patended & also spoke to them before I purchased & was told that they authorize Go Rhino to make them but there were many differences in the bars.
The N-Fab bars are 3" tubing; Wheel to Wheel; all one paice with brackets welded on the bars & the only ones who had a 6 step design.
Go Rhino is a 2.5" tubing; only cab length; brackets bolt to the bars & only come in the 4 step model.
I did alot of research on these since they were more expensive than others out there but they are definately worth the money in my opinion.
[*]Innovative and patented step and mounting system is the best on the market today.
Also they claim that Smittybilt is a totally different company (located in California & N-FAB is in Houston, TX).
Hope this helps.
The N-Fab bars are 3" tubing; Wheel to Wheel; all one paice with brackets welded on the bars & the only ones who had a 6 step design.
Go Rhino is a 2.5" tubing; only cab length; brackets bolt to the bars & only come in the 4 step model.
I did alot of research on these since they were more expensive than others out there but they are definately worth the money in my opinion.
[*]Innovative and patented step and mounting system is the best on the market today.
Also they claim that Smittybilt is a totally different company (located in California & N-FAB is in Houston, TX).
Hope this helps.