dpf delete update
#11
04-22-2008 | 10:28 PM
Thread Starter
|
Veteran
Joined: Mar 2008
Posts: 311
Likes: 0
From:
RE: dpf delete update
Well never heard of that, but if thats an option- works for me. I am doing good now as far as no problems with the truck after I mounted the pressure sensors and egt probes in the exhaust. I am actually kinda shocked I might have done something right. 2 days and going strong. Taking that emissions off really made a difference in perfomance- hopefully it stays this way.
#12
04-22-2008 | 10:31 PM
Thread Starter
|
Veteran
Joined: Mar 2008
Posts: 311
Likes: 0
From:
RE: dpf delete update
Man ill tell you i am very impressed with them. I haven't done much muddin with them but on the road they are very quiet for a mudder and handle extremely well. They said at 4 wheel parts I should get 40k out of them if they are balanced every 6k but they feel too soft for 40k tires- we'll see.
..for off-road purposes only of course. [8D]
#14
04-23-2008 | 09:23 AM
Thread Starter
|
Veteran
Joined: Mar 2008
Posts: 311
Likes: 0
From:
#19
04-23-2008 | 07:43 PM
Veteran
Joined: Dec 2007
Posts: 344
Likes: 0
From: Connecticut
RE: dpf delete update
[sm=ttiwwp.gif]
ORIGINAL: firemedic740
Ok update, all the sensors are tapped into the new exhaust along with the two pressure lines. After driving about 20 min the catalyst full 90% slowly dropped down to 80% then to 70% then a beep and back to system ok. For two days no problems and like h&s and badptrucks claim they make a code regardless- I haven't seen a code yet. Hopefully this is it. And by the way- my neighbors son is an engineer for cummins just found that out- he says the dealer can turn all this emissions crap off with their computer after I had already gone through this. I don't know if this is true because I am good friends with my dealership and the techs say they can't- neighbors son says they wont do it for warranty issues.
Ok update, all the sensors are tapped into the new exhaust along with the two pressure lines. After driving about 20 min the catalyst full 90% slowly dropped down to 80% then to 70% then a beep and back to system ok. For two days no problems and like h&s and badptrucks claim they make a code regardless- I haven't seen a code yet. Hopefully this is it. And by the way- my neighbors son is an engineer for cummins just found that out- he says the dealer can turn all this emissions crap off with their computer after I had already gone through this. I don't know if this is true because I am good friends with my dealership and the techs say they can't- neighbors son says they wont do it for warranty issues.
#20
04-23-2008 | 07:53 PM
Record Breaker
Joined: Jul 2006
Posts: 1,808
Likes: 0
From: Upstate, SC
