Just wondering if anyone can give me some numbers if they are running this programmer? I am interested in purchasing one and would like to know what i am in for.
Thanks.

 

Steve, you have a call on line 4. . .Steve, call on line 4

from what I have read about it. it makes decient reliable power. on the lower settings it uses timeing and duration to make more power, however on the higher settings it uses some pressure to make sure the rail doesnt run dry. but again your still limited to the lift pump.

just remember, the stock turbo can only handle about 100 more horse and 45PSI max before bad things happen, the auto tranny however will begin to slip at only 50-75 more horse.

me, I'm going with something a bit worse than edge. . .TST[sm=badbadbad.gif]

 

I love my chip- it's easy to use and I always have the power when I need (not that I ever run out). But my lift pump is going out now- could be just time for it or the chip may have caused it from me rallying a bit when I first got it. I have a six speed and it holds up great- I sometimes rarely drive on stage 4 or 5. But I do like it and a few of my friends run it now.

[IMG]local://upfiles/31532/D540D529E1F1428B9ABD53E5D5E64B97.jpg[/IMG]

 

DeAnna, get that lift pump changed ASAP. you dont want to fry your VP44.

 

got it, love it, and dont think i'll ever give it up. it's awesome. there are 5 power levels as you know, each level has 5 more minor tweek levels you can do to it so you can tweek it almost anyway you want. the guage package that goes with it is awesome, my only wishlist thingy on it would be if they had a tranny temp guage on there.

I generally run on setting #1, it has plenty of power for my needs. when I go into the mtns over the passes, it stays on the #3 setting and never breaks a sweat.

 

Stev00RAM360- Doesn't yours have a tranny temp? Does it not come on the 2005 Chip? Mine has one and it never gets over about 150- 160 degrees on my standard. Do you have all the MPH, etc settings? I don't know anything about the newer truck chips.


DREW- It's my birthday this weekend- I am still bugging my BF to by me the FASS System. But yes I am getting it done. Don't need no problems this time of year!!!

 

Happy B-day! what? yours has it? damn now i'm pissed. lol
I bought mine used, it came with the manual and it does not have anything in it and I dont see anything on the monitor for tranny temp :-(

 

Steve00ram360- Can you adjust your transmission slippage?

 

Armour- Before I had the chip, my tranny seemed hard to shift and in a six speed I was always shifting. With the chip- I gained a whole lot more RPM and it shifts great and I don't even know I'm shifting now its so smooth. Also the horsepower I gained is awesome as well as the 4" Hog exhaust I bought to make it smoke really good!! You would not be disatisfied at all.

 

can only monitor it, the edge will de-fuel when it slips.