AFE CAI >>>.
Thread Starter
|
Record Breaker
Joined: Oct 2006
Posts: 1,498
Likes: 0
From: NC mountains
AFE CAI >>>.
for those who have the AFE stage II CAI.......
I'm not sure about the 06 but, my 07 has the mass air sensor just out side of the air box in the tube.
Does the AFE tube have a location to mount he MAPP ? If not, what do you do with it... drill and tap ?
I'm not sure about the 06 but, my 07 has the mass air sensor just out side of the air box in the tube.
Does the AFE tube have a location to mount he MAPP ? If not, what do you do with it... drill and tap ?
Hall Of Fame
Joined: Jan 2004
Posts: 12,946
Likes: 309
RE: AFE CAI >>>.
I could be wrong but I believe what's on mine is an air temp sensor. a mass air sensor would sample the entire intake tube air flow and would be round with a wire center of some sort. do you have a pic?
Thread Starter
|
Record Breaker
Joined: Oct 2006
Posts: 1,498
Likes: 0
From: NC mountains
RE: AFE CAI >>>.
ORIGINAL: steve05ram360
I could be wrong but I believe what's on mine is an air temp sensor. a mass air sensor would sample the entire intake tube air flow and would be round with a wire center of some sort. do you have a pic?
I could be wrong but I believe what's on mine is an air temp sensor. a mass air sensor would sample the entire intake tube air flow and would be round with a wire center of some sort. do you have a pic?
I assume what's on my tube is a mass air sensor.... I could be wrong. In looking at pictures of the AFE
I couldn't really tell if it came set up to accept the stock sensor.
I imgine if it didn't one could be drilled and tapped in but, apparently it's very important to have it in the correct
location to avoid trouble codes.
here's a pic of the sensor mounted in a tube......
Thread Starter
|
Record Breaker
Joined: Oct 2006
Posts: 1,498
Likes: 0
From: NC mountains
RE: AFE CAI >>>.
ORIGINAL: SpLaT
Yup... AFE has mount for MAPP on the tube, comes with soft gasket as well.
Yup... AFE has mount for MAPP on the tube, comes with soft gasket as well.
Thanks Splat. I thought it would have had it but, just wasn't sure.....
Thread Starter
|
Record Breaker
Joined: Oct 2006
Posts: 1,498
Likes: 0
From: NC mountains
RE: AFE CAI >>>.
ORIGINAL: triton
I assume what's on my tube is a mass air sensor.... I could be wrong. In looking at pictures of the AFE
I couldn't really tell if it came set up to accept the stock sensor.
I imagine if it didn't, one could be drilled and tapped in but, apparently it's very important to have it in the correct
location to avoid trouble codes.
here's a pic of the sensor mounted in a tube......
ORIGINAL: steve05ram360
I could be wrong but I believe what's on mine is an air temp sensor. a mass air sensor would sample the entire intake tube air flow and would be round with a wire center of some sort. do you have a pic?
I could be wrong but I believe what's on mine is an air temp sensor. a mass air sensor would sample the entire intake tube air flow and would be round with a wire center of some sort. do you have a pic?
I assume what's on my tube is a mass air sensor.... I could be wrong. In looking at pictures of the AFE
I couldn't really tell if it came set up to accept the stock sensor.
I imagine if it didn't, one could be drilled and tapped in but, apparently it's very important to have it in the correct
location to avoid trouble codes.
here's a pic of the sensor mounted in a tube......
Hall Of Fame
Joined: Jan 2004
Posts: 12,946
Likes: 309
RE: AFE CAI >>>.
Just looked in the FSM and it is an air temp sensor & a pressure sensor combo. (page 5972)
Trending Topics
Thread Starter
|
Record Breaker
Joined: Oct 2006
Posts: 1,498
Likes: 0
From: NC mountains
RE: AFE CAI >>>.
ORIGINAL: steve05ram360
Just looked in the FSM and it is an air temp sensor & a pressure sensor combo. (page 5972)
Just looked in the FSM and it is an air temp sensor & a pressure sensor combo. (page 5972)
Thanks Steve. Sounds like another wasted bit of wiring [8D]