Out with the old....In with the new!
#21
RE: Out with the old....In with the new!
ORIGINAL: DBLR
I think he needs a few more muffler clamps on it[sm=icon_stickpoke.gif]
I think he needs a few more muffler clamps on it[sm=icon_stickpoke.gif]
Now you're gonna make me go back under there and pretty it up. [:@]
I was gonna paint it all black with the high temp paint before I put it in, but I got lazy.
I had to cut a section of pipe to get it in there. I ended up having to cut the 48" section off when I had it connected to the down pipe because I couldn't get it out of there in one piece. The 24" piece was a little too short. Soooooo....
What is this a beauty contest?
#22
RE: Out with the old....In with the new!
Looks good to me, I'll have to get off my a$$ and get a new exaust on mine, especially if it sounds right. I do not want the drone in the cab.
I've got a gasser truck with original Flowmasters dumped at the axle. I KNOW about cab drone, and don't want it on my driver
paul
I've got a gasser truck with original Flowmasters dumped at the axle. I KNOW about cab drone, and don't want it on my driver
paul
#23
Join Date: May 2006
Location: North Plains, Oregon
Posts: 1,497
Received 0 Likes
on
0 Posts
RE: Out with the old....In with the new!
ORIGINAL: cumminalong
**** off!
Now you're gonna make me go back under there and pretty it up. [:@]
I was gonna paint it all black with the high temp paint before I put it in, but I got lazy.
I had to cut a section of pipe to get it in there. I ended up having to cut the 48" section off when I had it connected to the down pipe because I couldn't get it out of there in one piece. The 24" piece was a little too short. Soooooo....
What is this a beauty contest?
ORIGINAL: DBLR
I think he needs a few more muffler clamps on it[sm=icon_stickpoke.gif]
I think he needs a few more muffler clamps on it[sm=icon_stickpoke.gif]
Now you're gonna make me go back under there and pretty it up. [:@]
I was gonna paint it all black with the high temp paint before I put it in, but I got lazy.
I had to cut a section of pipe to get it in there. I ended up having to cut the 48" section off when I had it connected to the down pipe because I couldn't get it out of there in one piece. The 24" piece was a little too short. Soooooo....
What is this a beauty contest?
#24
RE: Out with the old....In with the new!
ORIGINAL: cumminalong
Okay.....I got around to getting the pics. It's been raining the last couple days, so it looks a little nasty.
[IMG]local://upfiles/39492/CB080B31B25944DF8723124FC89840A1.jpg[/IMG]
Okay.....I got around to getting the pics. It's been raining the last couple days, so it looks a little nasty.
[IMG]local://upfiles/39492/CB080B31B25944DF8723124FC89840A1.jpg[/IMG]
#25
RE: Out with the old....In with the new!
ORIGINAL: sabersix
Hmmmm...why do Auto Craft Shops all look the same.
ORIGINAL: cumminalong
Okay.....I got around to getting the pics. It's been raining the last couple days, so it looks a little nasty.
[IMG]local://upfiles/39492/CB080B31B25944DF8723124FC89840A1.jpg[/IMG]
Okay.....I got around to getting the pics. It's been raining the last couple days, so it looks a little nasty.
[IMG]local://upfiles/39492/CB080B31B25944DF8723124FC89840A1.jpg[/IMG]
#26
RE: Out with the old....In with the new!
ORIGINAL: DBLR
I didn't want Mayfair to think we were not picking up his slack while he is out and about having fun in the sun down south [sm=icon_guiness.gif]
I didn't want Mayfair to think we were not picking up his slack while he is out and about having fun in the sun down south [sm=icon_guiness.gif]
#27
Join Date: May 2006
Location: North Plains, Oregon
Posts: 1,497
Received 0 Likes
on
0 Posts
RE: Out with the old....In with the new!
ORIGINAL: cumminalong
Yeah, but if it was Mayfair, I'd have expected to get a picture back with a bunch of handcuffs or something else perverse.
ORIGINAL: DBLR
I didn't want Mayfair to think we were not picking up his slack while he is out and about having fun in the sun down south [sm=icon_guiness.gif]
I didn't want Mayfair to think we were not picking up his slack while he is out and about having fun in the sun down south [sm=icon_guiness.gif]