Dodge Ram Van The full size Dodge Ram Van that showed that we can go and do as we please. Discuss the Dodge Ram Van here today.

2003 dodge ram van 1500 shorty

Thread Tools
 
Search this Thread
 
Old Oct 12, 2016 | 08:08 AM
  #1  
jose oquendo's Avatar
jose oquendo
Thread Starter
|
Amateur
Joined: Oct 2016
Posts: 32
Likes: 0
Unhappy 2003 dodge ram van 1500 shorty

good morning one and all i have a 2003 dodge ram van 1500 shorty. the van go's on and cut off after a few min clean IAC value clean tps clean new cps 5.2 v8 53000 mil can any help.........
 
Reply
Old Oct 12, 2016 | 11:57 AM
  #2  
funair02's Avatar
funair02
All Star
Joined: Mar 2012
Posts: 808
Likes: 0
Default

That is somewhat limited info, but I would GUESS that it could be the crankshaft positon sensor, the coil or a bad oxygen sensor.
A flaky fuel pump can do this too.
 
Reply
Old Oct 12, 2016 | 05:25 PM
  #3  
jose oquendo's Avatar
jose oquendo
Thread Starter
|
Amateur
Joined: Oct 2016
Posts: 32
Likes: 0
Default

hi, she have 2 new oxygen sensor 1 new crankshaft positon sensor 1 new coil 8 spark new air filter thx..... i was thanking about the fuel pump or the relay
 
Reply
Old Dec 21, 2016 | 10:07 PM
  #4  
jose oquendo's Avatar
jose oquendo
Thread Starter
|
Amateur
Joined: Oct 2016
Posts: 32
Likes: 0
Default

good evening one and all, i have a 2003 dodge van 1500 the van was running rough would cutoff and would not start i til the next day i would get a different code each time new TPS 2 oxygen sensor new coil IAC valve MAP valve fuel pump relay the last thing was a new fuel pump after all that work and frustration all it was a bad PCM, so i call protech auto systems paid $450 for a new pcm put it in and it still working better than new..... thanks for all the help now how to stop the death wobble can anybody help the front end is all new but it still wobble can anybody help thx........
 
Reply
Old Dec 22, 2016 | 12:11 AM
  #5  
alloro's Avatar
alloro
Van & CUV Section Moderator
15 Year Member
Liked
Loved
Community Favorite
Joined: Nov 2006
Posts: 5,373
Likes: 115
Default

Originally Posted by jose oquendo
now how to stop the death wobble can anybody help the front end is all new but it still wobble can anybody help thx........
Is the steering gear new as well?
 
Reply
Old Dec 22, 2016 | 10:14 AM
  #6  
jose oquendo's Avatar
jose oquendo
Thread Starter
|
Amateur
Joined: Oct 2016
Posts: 32
Likes: 0
Default

good morning yes the front end is all new even the gear box but there is a lot of play in the steering wheel too much...
 
Reply
Old Dec 22, 2016 | 04:21 PM
  #7  
alloro's Avatar
alloro
Van & CUV Section Moderator
15 Year Member
Liked
Loved
Community Favorite
Joined: Nov 2006
Posts: 5,373
Likes: 115
Default

Originally Posted by jose oquendo
good morning yes the front end is all new even the gear box but there is a lot of play in the steering wheel too much...
How about the sliding portion of the steering shaft or the shaft coupler? Any play in those?
 
Reply
Old Dec 23, 2016 | 03:53 PM
  #8  
jose oquendo's Avatar
jose oquendo
Thread Starter
|
Amateur
Joined: Oct 2016
Posts: 32
Likes: 0
Default

good afternoon one and all i did go out and checked the steering shaft there is no play..
 
Reply
Old Jan 4, 2017 | 08:51 AM
  #9  
blackvan's Avatar
blackvan
All Star
Joined: Mar 2012
Posts: 933
Likes: 1
From: South Kentucky
Default

So you are saying that a new pcm solved some of the problems. The steering on these trucks is not nearly as precise as a Ford but "death wobble"??

Are you towing, is this perhaps a towing or trailor issue?
 
Reply
Old Jan 4, 2017 | 03:44 PM
  #10  
jose oquendo's Avatar
jose oquendo
Thread Starter
|
Amateur
Joined: Oct 2016
Posts: 32
Likes: 0
Default

good afternoon, yes it solved all of the problems she running like new, no towing of any kind i think its the new sorry rebuild gear box, and yes i adjust it but still not good
 
Reply



All times are GMT -4. The time now is 12:55 PM.