1999 dodge ram 2500 van wipers died
#1
1999 dodge ram 2500 van wipers died
Hello! New here.
Wiper motor and washer died.
TRIED:
*Jump 12v directly to motor. It works
*Jump 12v directly to washer, it works
*Jump motor body directly to batt ground, it does not work.
* new wiper/turn signal multi switch. Does not work
*replace "intermittent module" (above glove box). Does not work.
* I found a schematic showing an "Integrated Electronic Module" Supposed to be "Left side of the dash". I can't find this. Ready to just wire a toggle switch directly. Any help would be Greatly appreciated!
* Hooked up my scanner and it is giving me engine data in real time. When I switch it over to "Body", it says "No Communication", and asks if the key is on.
Wiper motor and washer died.
TRIED:
*Jump 12v directly to motor. It works
*Jump 12v directly to washer, it works
*Jump motor body directly to batt ground, it does not work.
* new wiper/turn signal multi switch. Does not work
*replace "intermittent module" (above glove box). Does not work.
* I found a schematic showing an "Integrated Electronic Module" Supposed to be "Left side of the dash". I can't find this. Ready to just wire a toggle switch directly. Any help would be Greatly appreciated!
* Hooked up my scanner and it is giving me engine data in real time. When I switch it over to "Body", it says "No Communication", and asks if the key is on.
Last edited by Oldiefarty; 04-17-2024 at 06:19 PM.
#2