Use this link they have the cheapest exhaust set ups I have seen. For example Gibson sport truck side exhuast for 94-01 Ram $295.00

Proficientperformance.com

 

Ok....I went to gibsonperformance.com and couldn't find the sound clips....is this the right site? Please point me to the area...
I am very interested in these!

 

So basically we have people that like Borla, Magnaflow, and Gibson. I wish there was a way to hear them all or anyone that has had experience with them all?

 

The one thing I did to save some cash was to just replace the muffler. The stock pipes are the same aluminized pipe in the kits unless you are going w/ S.S. Have a tip welded on and you are good to go. I have a Magnaflow muffler (the one from kit #15740) on my 02 5.9 and it sounds great and performs better. The gas mileage increased from 12-13 as a constant to 15-17 depending how I drive. I also have a stage 2 jet chip and plan on a cold air induction. A local muffler or perfomance shop should be able to help. Good Luck.

 

Anyone have experience with the summit system. They have one with dual pipes listed for $149 ??

 

I have an '03 4.7L and just purchased a Borla Pro XS muffler. It should be here tomorrow and if I have time, I'm going to put it on tomorrow.

 

I have an 03 with the 4.7L also, let us know what you think of the muffler. I'm looking to get a mild performance increase, but more on the sound and the Gas milage..

Keep us posted..

 

mikegonzo,
That is the right site but it looks like they changed it since the last time I was there. I couldn't find the sound clips either....sorry.

 

bullitt1229, if you have the time take a recording of the sound after you have it on?

 

Ok, I posted this in the exhaust forum as well, but it seems more people read the Ram forum than the exhaust forum. I received my muffler today but the muffler I got is only 19" from inlet pipe to outlet pipe. I measured my stock muffler and it is 23"+ from inlet pipe to outlet pipe. Are there some extensions that I can buy so I can bypass having it welded on? Or can I have some extensions welded on and then use the existing clamps to just replace the muffler? Or do I have to have extensions welded on and then the muffler welded on too? I'm at a loss and don't know what to do. I would appreciate any and all help so that I can get this done tomorrow. Thanks.