Why does your tranny need rebuilt again? The metal shavings? You should pony up the dough and send it too IPT performance transmission. Get it done right.

What is your car idling at? If it is idling too slow, it can stall when putting it into gear.

 

its idling at around 700 to 800rpm. even if you bring it up to 1500rpm it still likes to die. I plan on haveing maxwell tranmissions he is the local favorite do my tranny he has build transmissions for 9sec. dsms and even faster camaro's so ill trust him. Im still hopeing i can find the problem myself though b4 i take it in.

OK I have my official list of parts.
-high stall tourqe convertor fromt IPT
-Shift kit also IPT
-End clutch kit also IPT
-lsd from speed freak racing
-recalibrated ecu being done by jet chips
-long tube headers from 3sx
-My exhuast is being done by a local shop 2 3/4 inch from the headers back no cat going to y pipe and then going out through a set of super 40's on both sides.
-ground control coil overs lets me lower up to 4 inches
- my custom dual ram air intake
-ground wire kit speed freak racing
-underdrive pulley 3sx
-all of the bubly door panels and stuff is being redone by me.( you can buy/order the material from hobby lobby) its just like doing a head liner not hard at all.
-upgradeing the ecu caps
-tinted windows
-LAMBO DOORS!
That is the garuentied list.
some things that i mite get if i need them or want them is a jdm used engine with less then 50,000miles on it. subs and if i cant clean my carpet to my standards ill get new carpet.

 

The only thing on your list I'd question is the speed freak lsd. It is not a true LSD, it is only an insert that turns the diff. into a posi-track. I think most people that ran one for any length of time had it break altogether, or wear out their transaxle. I'd spend the extra money and get a real lsd.

 

Alright! Its starting to come together but i had to extend my date of me hoping to have it donebecuase i was suspended from work and they were going to frie me so i just quit and now looking for a new job. It will be done b4 the end of september though it sucks its taking along time and ive had alot of people making offers for it and im considering takeing them. As for my supercharger i got pissed off on that idea and sold it to my friend with a 94 base model its going on his car now. I rebuilt the old turbo off my talon the lil t25 garrett and im considering maybe putting it on the stealth but i probroly wont. I HATE TURBO LAG. All of the dents are now out of it so im happy and my bumper is almost done getting painted that was delayed becuase someone hit the talon so i had to fix that 1st. I got the rims on as you guys have seen and i just got my ground control coil overs in today they are great. Im working on cleaning right now the engine compartment and redoing the door panels and the dash from the bubbles. for all the material it cost 75$ so if you dont like the bubbles and are good with your hands its not that bad or expensive. Next week im getting my heads ported and polished then hopefully sumtime in the next week or so i can order my cams from 3sx. I removed the lambo doors that way i could get more go fast parts becuase i want a low 14 1/4mile im hoping with my parts ill be close