2.4L 4cyl no Fire at all replaced everything
#1
2.4L 4cyl no Fire at all replaced everything
96 dodge stratus 2.4l 4 cyl automatic....I started the car 2 weeks ago let it run and then shut it down. Went to start it last week and its getting no fire at all, all 4 are dead.. All relays and fuses are good. replaced relays. REPLACED- PCM, CRANK SENSOR, CAM SENSOR, COIL PACK PLUGS AND WIRES. Timing is all good. I am at a loss. the asd aint getting any juice which aint giving the coil any juice thats what my buddy told me anyway. ase certified. What it left? wiring issue? Tried moving them around while cranking, still nothing. What else is left that would cause no spark PERIOD? SNAP ON scanner was hooked up to computer, crank and cam sensors are reading fine. I am at a loss..... Please someone respond and help me with this situation I am lost...... turns over fine just no fire.............
#3
No there is no codes being thrown period just getting no fire at all...... only thing I can think of thats left is a wiring problem? My buddy who is ase certified told me the asd is not powering which aint powering the coil... and no the pcm has not been flashed. my friend has a 2.4l stratus same as mine he gave me his because he totaled the car got smashed in the side, either which way it should of fired if it was the pcm causing no fire I replaced it with a good one.
#4
#5
Did you blow any fuses when you tried to start it? My gf's 99 kept blowing one fuse. I tried all the Haynes trblshooting without any luck. Finally pulled the starter and took it to my alternator guy who tore it down. The contacts in the solenoid had worn down to the point that --apparently-- it caused too much juice to run, blowing the fuse. He replaced the contacts and she hasn't had any problems (knock on wood) since then.
#7
on a 2.4 you still have spark with a broken timing belt cuz the crank is still turning and the crank sensor makes spark you won't have injector fire since the cam sensor wouldn't be triggering.
Trending Topics
#10