2006 ASC Diamondback Viper
2006 ASC Diamondback Viper
2006 ASC Diamondback Viper
Weight - 3325 lbs
HP - 615 hp HP/Weight - 5.4 lbs per hp
0-60 mph - 3.5 seconds Top Speed
(from ASC Press Release) A “snake” with an all-new skin—and ultimate display of the production merits of ASC’s patent-pending OmniCarbon™ process--the Diamondback Viper is super-light and super-fast. It’s fitting that ASC, which helped the Chrysler Group bring the new Dodge Viper SRT10 coupe to life, would, with the aid of McLaren Performance Technologies, show how the Viper coupe might be taken to an all-new level of “extreme.” The 615hp Diamondback Viper features a carbon fiber roof, deck lid, rockers, fascia inserts, body trim and a massive OmniCarbon™ hood that shows off ten unique trumpeted air intakes, with individual port throttles, peeking through—a McLaren Performance Technologies feature reminiscent of McLaren Can-Am engines of the past. The hood also shows off ASC’s expertise in compression-molded carbon fiber, both painted and woven. It’s displayed beautifully, with a broad, clearcoated racing stripe down the Artic White-painted expanse, subtly outlined by “Viper Blue” and “McLaren Red” pinstripes. In all, ASC removed about 85 lbs. of weight from the vehicle—including cutting the weight of the hood by nearly half versus the production model. Taken together with the powertrain modifications by McLaren Performance Technologies, the power-to-weight ratio was increased, resulting in an estimated increase in 0-60 mph time of 3.5 seconds. And, importantly, ASC’s OmniCarbon™ isn’t just light and nice to look at: ASC has reduced cycle times in the process by 80 percent versus conventional molding methods, and is confident its process meets OEM production specifications.
Weight - 3325 lbs
HP - 615 hp HP/Weight - 5.4 lbs per hp
0-60 mph - 3.5 seconds Top Speed
(from ASC Press Release) A “snake” with an all-new skin—and ultimate display of the production merits of ASC’s patent-pending OmniCarbon™ process--the Diamondback Viper is super-light and super-fast. It’s fitting that ASC, which helped the Chrysler Group bring the new Dodge Viper SRT10 coupe to life, would, with the aid of McLaren Performance Technologies, show how the Viper coupe might be taken to an all-new level of “extreme.” The 615hp Diamondback Viper features a carbon fiber roof, deck lid, rockers, fascia inserts, body trim and a massive OmniCarbon™ hood that shows off ten unique trumpeted air intakes, with individual port throttles, peeking through—a McLaren Performance Technologies feature reminiscent of McLaren Can-Am engines of the past. The hood also shows off ASC’s expertise in compression-molded carbon fiber, both painted and woven. It’s displayed beautifully, with a broad, clearcoated racing stripe down the Artic White-painted expanse, subtly outlined by “Viper Blue” and “McLaren Red” pinstripes. In all, ASC removed about 85 lbs. of weight from the vehicle—including cutting the weight of the hood by nearly half versus the production model. Taken together with the powertrain modifications by McLaren Performance Technologies, the power-to-weight ratio was increased, resulting in an estimated increase in 0-60 mph time of 3.5 seconds. And, importantly, ASC’s OmniCarbon™ isn’t just light and nice to look at: ASC has reduced cycle times in the process by 80 percent versus conventional molding methods, and is confident its process meets OEM production specifications.
Record Breaker
Joined: Oct 2005
Posts: 1,239
Likes: 0
From: ICT, DubK
RE: 2006 ASC Diamondback Viper
ORIGINAL: MidnightBlueNeon
That "color sheme" is unpainted carbon fiber, I believe...
ORIGINAL: ViperGTS
Very interesting color scheme.
Very interesting color scheme.
but then it'll reach over 200mph or not
