Just wanted to say hi and to let everyone know I out there... Check my site for Tips, Tricks, Pics and everything else there is... Its allways growing (when I get the time) so check back often..Im not here to sell anything, just to help everyone out.

 

thanks 4 the sitemaybe u can help me by tell me how to take the rev limter off of my truck</P>


</P>


thanks tom</P>


</P>

 

Hello I just bought an 03 4X4 SXT and I was wondering if you knew if they made a supercharger for the 3.9 litre magnum and if there is a chip out for it.</P>


Also I noticed that you have exhaust on yours, how does it sound?</P>

 

There are alot of different chips and superchargers for the 3.9... Just about any of the supers for the 5.2 and 5.9 will work on the 3.9's with a little bit of moding of the mounting bracket. If you check my website, you can find a list of super charger and chips manufacturers.

 

What type of exhaust do you recommend? I dont want it to be all high pitched, I would like it to sound close to a V-8 is that possible?

 

flowmaster 50 series. I have one and am always getting acused of having a v8. It is a reall deep sound and not real loud when on the highway.

 

Sweet! thanks bud. Whats the price on one of those?

 

normally around $90 for the muffler and about $30-40 for install at most muffler shops. Once it is installed, the longer it is on, the better it sound, almost like it needs to be broke in.

 

<IMG src=smileys/smiley6.gif border="0">I'm having problems replacing the front brake pads on my 1987 dodge dakota have never changed them before although I've changed the pads on every one of my cars and trucks I've never seen a clip on the outside pad like this one has and I'm having problems getting it to sit right. Can u help me please?

 

is the clip on the backside of one pad for each side??