General Tech Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.

some info on exhaust systems

Old Aug 5, 2005 | 11:31 PM
  #1  
thump186's Avatar
thump186
Thread Starter
|
Record Breaker
Joined: Sep 2004
Posts: 1,750
Likes: 0
Default some info on exhaust systems

info on sizing and hp

Restrictive Exhaust

A restrictive exhaust creates backpressure in the exhaust system that hurts your vehicle's performance in two ways:

(1) The engine has to work harder to force exhaust gases out of the cylinders.

(2) Engines cannot scavenge burned exhaust gases out of the cylinder efficiently. This leaves exhaust gases in the cylinder to dilute incoming air/fuel mixtures and rob your engine of horsepower.

Pipe Diameter

A common misconception is that the larger the diameter, the better the system. But bigger isn't always better. Systems that are too large in diameter can actually hurt performance. As a general rule, switching to a performance system that is 1/4" to 1/2" inch larger than stock will provide you with the best horsepower increases. To determine which pipe diameters will be best for your system, decide what RPM range your engine will operate at, most of the time. Smaller diameter pipes will produce low- to mid-RPM torque. Larger diameters produce mid- to high-RPM torque.

Which 26.gif (27343 bytes)

Horsepower Depends on Flow not Pipe Diameter Alone

Bigger isn't always better. Systems that are too large in diameter can actually hurt performance. Improved flow is what you need. Having large diameter pipes isn't what's cool. Going fast and making horsepower is.

Balance Tubes

Balance Tubes (or 'H' pipes) help to even out the pulses in the exhaust gases and balance the backpressure between both banks of your engine. They not only help improve horsepower, but sound as well. To find the right location to install your balance tube, apply a strip of paint down the front portion of the exhaust pipes. The balance tube should be placed where the paint burns off (bubbles) on the exhaust pipes. Generally, put the balance tubes as close to the headers as possible. The balance tube diameter should be at least 75% of the diameter of the pipes with which it connects




[IMG]local://upfiles/8070/0815B960ECEE49C4889D91B2BB4B1D14.gif[/IMG]
 
Reply
Old Aug 6, 2005 | 11:27 AM
  #2  
crazy_croc_head707's Avatar
crazy_croc_head707
Joined: Aug 2005
Posts: 24
Likes: 0
From:
Default RE: some info on exhaust systems

Thanks for the tip man. I think I will go with a 2.5 exhaust system on my Stratus
 
Reply
Old Aug 6, 2005 | 11:29 AM
  #3  
thump186's Avatar
thump186
Thread Starter
|
Record Breaker
Joined: Sep 2004
Posts: 1,750
Likes: 0
Default RE: some info on exhaust systems

i would not go above that it would be useless for you to.
 
Reply
Old Aug 6, 2005 | 11:37 AM
  #4  
crazy_croc_head707's Avatar
crazy_croc_head707
Joined: Aug 2005
Posts: 24
Likes: 0
From:
Default RE: some info on exhaust systems

Yea. That I know.

Do you know of any upgrades for the 05 Stratus?
 
Reply
Old Aug 7, 2005 | 11:00 AM
  #5  
thump186's Avatar
thump186
Thread Starter
|
Record Breaker
Joined: Sep 2004
Posts: 1,750
Likes: 0
Default RE: some info on exhaust systems

ORIGINAL: crazy_croc_head707

Yea. That I know.

Do you know of any upgrades for the 05 Stratus?

for the 05 stratus. it all depends on what motor, is it the coupe or the sedan ect......
 
Reply
Old Aug 7, 2005 | 12:09 PM
  #6  
crazy_croc_head707's Avatar
crazy_croc_head707
Joined: Aug 2005
Posts: 24
Likes: 0
From:
Default RE: some info on exhaust systems

Its a Sedan with the 2.4L 4 cyl.
 
Reply
Old Aug 7, 2005 | 12:12 PM
  #7  
thump186's Avatar
thump186
Thread Starter
|
Record Breaker
Joined: Sep 2004
Posts: 1,750
Likes: 0
Default RE: some info on exhaust systems

alot of srt4 parts will fit on the engine such as
turbo setup,
plug wires
coil rack

ect........
 
Reply
Old Aug 7, 2005 | 12:17 PM
  #8  
crazy_croc_head707's Avatar
crazy_croc_head707
Joined: Aug 2005
Posts: 24
Likes: 0
From:
Default RE: some info on exhaust systems

What would you suggest? As in upgrades. And all of the gooooood stuff. lol.
 
Reply
Old Aug 7, 2005 | 12:56 PM
  #9  
thump186's Avatar
thump186
Thread Starter
|
Record Breaker
Joined: Sep 2004
Posts: 1,750
Likes: 0
Default RE: some info on exhaust systems

look into some msd wires & coil for starters. look around on sites like msd and look at part #'s
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 07:55 PM.