yet another cobra huh? *yawns*

how exciting for you....

anymore..cobras are about as exciting as a civic with a body kit, but faster.

and a .702 lift? seeing much street action?

 

[Deleted by Admins]

 

I could be wrong but I think most 408 setups for the 360 use the stock bore but gain displacement due to a longer stroke. So technically there isn't any machining, do a google for 408 stroker, there's a fairly nice setup out there for ~$1400.
issuez

 

hmmm..i know the 340 strokes to 421..i know someone who runs one, and it hauls. im not personally familiar with the 408 setup...it could be bore and stroke...

 

Close. It's a .030" overbore with a 4.00" stroke crank. The block probably needs to be notched for clearance.

 

You are correct, 0.030" overbore, my mistake.

 

I have been seriously contemplating it Come next spring when I can ride my motorcycle on a regular basis, I am going to tear into the engine (360... obviously). I plan on going to a 408, and possibly supercharging too... not sure yet. I don't want to build up for HP though, it is going to be all about low end torque (obviously still more high end HP then stock...).