i just bought a greddy oil catch can and was wondering where to mount it it? it also came with two hoses, one is 9mm for the pcv part and it also came with a small hose and two little elbow things thatthe little hoseconnects to and im guessing they screw into the can, how do i hook that part up?

 

Mounting is a problem, due to clearance issues. As for the parts you mention, the two "elbow things" screw into the top and bottom sideof the can and the clear hose goes in the middle - - it's just a way to show you how full your catch can is.....

Dusty

 

where do ppl normally mount theres, i wanted to mount it above the tranny or somethin out of the way of everything, where is a good spot for it? i bought the bracket that MP makes for it.

 

That's the reason mine is still in a drawer and I installed the $20.00 OCC......I didn't want to start drilling holes in a brand new car......

Dusty

 

If you have your stock air box you can put it on the passenger side fire wall just above the manifold directly behind the pcv valve. that is where mine is.
Bit of advice dont use the lines if it is the clear ones.I had mine on a day and it began to whine. When i opened the hood, the line had got weak and closed shut. if you have your stock box let me know and i will get some pics

 

How does a catch can get installed...And is it needed if you are plannin to run a 50 trin ball bearing kit.... or is itfor non ball bearing??

 

lol catch can is a must, no matter what kind and size turbo you got.Tyler, dont use the hose that came with the cc, go to autozone or an autoparts store and buy fuel lines....wich are a lot bettet...that clear hose will not stand the heat of the engine.Come down this thursday and I'll put it on for you, or show you how.

 

I have my greddy catch can mounted on the battery tray bolt.....piece of cake, takes 2 minutes.

 

might try the center bolt at bottom of the battery tray. that's where i mounted my alta/perrin tank for the breather vent.

 

Is there an echo in here ??? [8D]