Okay the Perrin OCC is designed to work with the stock airbox. Most people with stock airboxes use the $20 OCC...theres one guy in this thread that has a problem with it, but everyone who has one is very pleased with it, even though it may have to be emptied more often. Heres the thread. And heres some pictures as well. In a few the OCC is circled in Red, in case you couldn't find it. I don't want it to be a Where's Waldo OCC thread. LOL

The Perrin is a bit more, but is designed to work with the stock airbox like I said, AND it comes with a bracket to mount it where you see it in the first picture

http://srtforums.com/forums/showthre...t=Greddy+Catch

Picture 1: Perrin OCC mounted with Stock airbox. It comes with a special bracket
Picture 2: Ghetto $20 OCC...will work with any air intake/stock airbox
Picture 3: Greddy OCC near the battery. I know its not gonna help you much, but its just a view.

Hope that helps you.

[IMG]local://upfiles/8899/D4E3D8A62A5F48E1AFA841AD9E2AFFF8.jpg[/IMG]

[IMG]local://upfiles/8899/A271DA9B7BD6409CA1035A5B67AE7596.jpg[/IMG]

[IMG]local://upfiles/8899/AA4AD25BD20B4D0886233717F028AC94.jpg[/IMG]

 

SexySRTChick- Thank you

PSIChick- My OCC is different looking then the one you have and it is the Greddy???
http://www.turboneonstore.com/accessories.htm Check out the second one down.

 

No Problem. If I were you I'd try to fasten it on the firewall the way that the Perrin OCC is designed. Or get an Intake. Theres two types of Greddy OCC's. Ones Universal ones "made" for the SRT-4. To my knowledge. I've seen a couple different looking ones.

 

there are two types of greddy catch cans. well, at least there were. the square type like i have is actually an older design, the round one like on turboneonstore's site has replaced it and they are phasing out the square ones. not a big deal, they do the same thing and there really is no difference now as you can get the round cc in either the 9mm or 15mm size. when i bought mine the 9mm version was only available in the square design.

neither the square or the round were actually "designed" for our cars, or any car for that matter. they are a universal application. stores are selling the mounting brakets and hardware needed to use these and calling them srt specific kits. technically they are correct as the included hardware does make it srt specific, but really it's just a selling ploy to get you to buy from them.

 

Yep, here's a pic showing my ghetto OCC's and where and how they are installed:


[IMG]local://upfiles/193/FD15BFD501D04CC8A8375FD2A9893E7C.jpg[/IMG]