$20 Oil Catch Can for an SRT-4
#52
#53
#55
RE: $20 Oil Catch Can for an SRT-4
FYI, got a personal message today wondering if it was OK to pour the oil from the catch can back into the engine...I didn't know, so I checked around and evidently the oil that gets blown out contains bad stuff like water (from condensation) and other things. Besides, we're only talking a few ounces....
#56
RE: $20 Oil Catch Can for an SRT-4
Dusty,
not to be out done... I took your advice (thanks for posting all the info and pics) and made my own catch can... I almost beat you on price... almost... I used basically all the same parts you did.
$2.38 - Fittings - Home Depot
$12.69 - Canister/Filter - Walmart
$6.70 - Hose/Zip ties - Advance Auto
$21.77 - grand total
I took about 30-40 mintues to install and wanted mine to look like it wasn't even there... haven't driven the car yet (I hate rain!)... but otherwise, simple install Tommy likey!
[IMG]local://upfiles/3295/Ig135613995.jpg[/IMG]
not to be out done... I took your advice (thanks for posting all the info and pics) and made my own catch can... I almost beat you on price... almost... I used basically all the same parts you did.
$2.38 - Fittings - Home Depot
$12.69 - Canister/Filter - Walmart
$6.70 - Hose/Zip ties - Advance Auto
$21.77 - grand total
I took about 30-40 mintues to install and wanted mine to look like it wasn't even there... haven't driven the car yet (I hate rain!)... but otherwise, simple install Tommy likey!
[IMG]local://upfiles/3295/Ig135613995.jpg[/IMG]
#57
RE: $20 Oil Catch Can for an SRT-4
Good job, looks sharp!!!!! Was there a filter "element" in your bowl as it came from the maker? I took mine out, and according to the folks at SRT Forums, you'll collect more oil that way (and that's a good thing! :-)). I also added hose clamps to the fittings after one member reported his connection at the PCV valve popped off....[sm=smiley20.gif][sm=smiley4.gif][sm=smiley20.gif]
#58
RE: $20 Oil Catch Can for an SRT-4
That is a faked image. The hood is far too straight around the headlights, the shape around the fenders and the nose are too squared. Look at your SRT-4 then look at that pic, it's not even close. To get those headlights to work, you would need a new hood, fenders and nose to go with it.[sm=smiley2.gif]
#59
RE: $20 Oil Catch Can for an SRT-4
i really dont know cause i found it on the internet that's why i asked if anyone had seen this before, but i'll check it out and see what they say over there at the bodyshop. i also found another picture but looks very fake. And also if you take a good look at the intercooler it looks a bit smaller than the one found on the srt-4.
[IMG]local://upfiles/3555/Ki200474530.jpg[/IMG]
[IMG]local://upfiles/3555/Ki200474530.jpg[/IMG]
#60