1/4 mile times on srt-4
<FONT color=blue size=3>hey there i was wondering about 1/4 mile times on everyones srt-4 im just trying to see what there running, also if you could put what mods if any you have done.</FONT>
<FONT size=2>Haven't made it to the track since i've done mucho mods, but bone stock with 15inch centerline mags and mickey thompson slicks ran a best 13.76@103.80 with a .6 reaction time.</FONT>
Originally Posted by andybuzz2u
<FONT size=2>Haven't made it to the track since i've done mucho mods, but bone stock with 15inch centerline mags and mickey thompson slicks ran a best 13.76@103.80 with a .6 reaction time.</FONT>
eh, not real good. I hope the 05 srt4 will get it down lower
</P>
<FONT color=blue size=3>well no offence to him but i hear then can go faster then 13.70's but i guess it depends on then driver, and track conditions</FONT></P>
Trending Topics
Originally Posted by Viper-GTS
Originally Posted by andybuzz2u
<FONT size=2>Haven't made it to the track since i've done mucho mods, but bone stock with 15inch centerline mags and mickey thompson slicks ran a best 13.76@103.80 with a .6 reaction time.</FONT>
eh, not real good. I hope the 05 srt4 will get it down lower
</P>Well not sure about that from what i've heard they will be '04 carry overs with a few minor fasica changes. I don't know what you drive but 13.76 in a quarter with a stock car is great. The ones that can do that can be counted on one hand. And i don't consider the N2O cameros/vettes, svt mustangor venom vipers or othersas stock offerings. They are sent to a speed shop to get hoped up. The biggest problem im running into with the srt4 is complete loss of traction under boost. Taking it to the dyno tommorow after i have done many mods my guess is around 320+ whp. Plan on tearing up the quarter tonight to get some new times. But i know i will only spin the tires off which i can do from 1st thru 4th gear. I think the KW coilovers i ordered will let me run a wider tire with out it sticking out past the fender, which i think looks stupid.</P>


