quick ? about our fog lights. 1st) type of bulb 2nd)whats the best bulb to swap out for upgrade & 3rd) do u need to take the front bumper off to change out? i was wanting to put mesh in my grill so i guess this would be a good time to take the whole thing off and just replace the bulbs while i have it off, but how hard is this to do?

 

not that hard....give it a try

 

hope you have small hands

 

easiest way would probably be to jack up the front end and creep under. i never replace one but i have a clear view of the foglight housing every time i change the oil

 

thank u for an actual tip...

 

for the passanger side its almost impossible to get the bulb out. take the headlight off and its 20 times easier. the driver side can be changed from underneath

 

now that we have established how hard this will be, can anyone tell me what size bulb i need and does anyone have any recommendations as to what would be a better looking bulb....id like to have the rainbow look or maybe just xenon blue....anyone know anything about these types of fog lights for out cars

 

well, it sounds crazy but i have heard of it being done:
replace the foglights with a yellow bulb
modify your headlights so that you have HID highs (being in the turn signal spot). rewire accordingly from the relay / HID kit. if you want to do this, itl look cool and be unique. however i wouldnt use your origional headlighs, i have seen a website of someone that actually does HID conversion on the *other* forum. but this might be a little more 'different'. since you would retain your stock high/low beam and also have HID on a separate switch. if you ask me this would look kickass... but quite a lot to do just for a burned out bulb, lol. ok, my little hijacking is over now.

i know sylvania makes bubls for our cars.
the stock 893s are 38 watts.
some similiar bulbs:
899=38 watts
885=50 watts
880=29 watts.

check out sylvania's website if you want