If Your A Newbie, Post And Introduce Yourself
#3731
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
Just found the site and signed up this week - WOW! My wife is complaining because I have been spending a couple of hours a day here so far! I have some problems, but they aren't new to you guys - found out how to fix enough stuff crapping out on my 00 Durango 4x4 to keep me busy for many weekends!
![Big Grin](https://dodgeforum.com/forum/images/smilies/biggrin.gif)
whats up everyone my names jeremy i just picked up my first dodge! its a 99 neon with a decent amount done to it.to start it ran 13.0 with the potenial for 12.8.its a dohc block and a fully built sohc head crane 14 cam and full titanium valve train,10.5:1 pistons,light wieght fly wheel stage 4 clutch,light under driven pulley,3.55 trans with phantom lsd,nitto auto x tires they apparently grab better them drag radials X=.it has msd to with 2 step and it only wieghs 2100 with half tank of gas..oh and the 13.0 was witht he help of a wet 75 shot and it has a mopar chipped ecu so i guess i got a decent first one lol
![Big Grin](https://dodgeforum.com/forum/images/smilies/biggrin.gif)
#3732
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
Hello, everyone.
My name is Chris, and I'm checking in from the tiny little town of Elliston, Virginia. It's about midway between Roanoke and Blacksburg (think Virginia Tech.)
I'm really glad to have found this place. With an 01 Caravan, I think this site is going to prove very helpful.
My name is Chris, and I'm checking in from the tiny little town of Elliston, Virginia. It's about midway between Roanoke and Blacksburg (think Virginia Tech.)
I'm really glad to have found this place. With an 01 Caravan, I think this site is going to prove very helpful.
#3733
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
sure do lghtngblt i only have mostly body shots as of right now but ill dig up the motor built ones
![](http://i401.photobucket.com/albums/pp95/jm31288/jeremysneon.jpg)
![](http://i401.photobucket.com/albums/pp95/jm31288/jeremysneon3.jpg)
and the old sohc before the swap
![](http://i401.photobucket.com/albums/pp95/jm31288/jeremysneon4.jpg)
ill get some of the swap asap
![](http://i401.photobucket.com/albums/pp95/jm31288/neonmotor4.jpg)
![](http://i401.photobucket.com/albums/pp95/jm31288/neonmotor2.jpg)
ill get some better engine bay shots today and post them up. [=
![](http://i401.photobucket.com/albums/pp95/jm31288/jeremysneon.jpg)
![](http://i401.photobucket.com/albums/pp95/jm31288/jeremysneon3.jpg)
and the old sohc before the swap
![](http://i401.photobucket.com/albums/pp95/jm31288/jeremysneon4.jpg)
ill get some of the swap asap
![](http://i401.photobucket.com/albums/pp95/jm31288/neonmotor4.jpg)
![](http://i401.photobucket.com/albums/pp95/jm31288/neonmotor2.jpg)
ill get some better engine bay shots today and post them up. [=
Last edited by 99sohcslammer; 05-08-2009 at 10:25 AM.
#3734
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
Hello, everyone.
My name is Chris, and I'm checking in from the tiny little town of Elliston, Virginia. It's about midway between Roanoke and Blacksburg (think Virginia Tech.)
I'm really glad to have found this place. With an 01 Caravan, I think this site is going to prove very helpful.
My name is Chris, and I'm checking in from the tiny little town of Elliston, Virginia. It's about midway between Roanoke and Blacksburg (think Virginia Tech.)
I'm really glad to have found this place. With an 01 Caravan, I think this site is going to prove very helpful.
![Big Grin](https://dodgeforum.com/forum/images/smilies/biggrin.gif)
#3735
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
hi every one just found this site and see there is a lot of info. on here. i have a 2005 dodge neon sxt wich i would like to add some pep in its step, but not to race just to help with my unique style of driving.
#3736
![Arrow](https://dodgeforum.com/forum/images/icons/icon2.gif)
Hi! Happy to be here and to be a new dodge owner just bought an 02' Dodge Durango SLT, Having to do a few things to it but overall i think i like it better than my 04' GMC Envoy.
#3737
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
DJ HENRY HERE IN TEANECK, NJ (northern nj )
hello to the group
i am looking for any info on a master tune up on my
1995 ram conversion van model 2500 with 360 cu in engine (5.9)
cap,rotor,ignition wires,fuel filter,air filter ,pcv valve, and any suggestions from the group if i left out something
i have 100,000 miles a newly installed last week 120 amp alternator,and timing belt
i also plan on a fully synthetic 20/50 weight oil change ,anti freeze change ,transmission fluid & filter change large trans cooler install, dual cat & exhaust mufflers, do i need to check my codes??
dj henry
dj00007@aol.com
hello to the group
i am looking for any info on a master tune up on my
1995 ram conversion van model 2500 with 360 cu in engine (5.9)
cap,rotor,ignition wires,fuel filter,air filter ,pcv valve, and any suggestions from the group if i left out something
i have 100,000 miles a newly installed last week 120 amp alternator,and timing belt
i also plan on a fully synthetic 20/50 weight oil change ,anti freeze change ,transmission fluid & filter change large trans cooler install, dual cat & exhaust mufflers, do i need to check my codes??
dj henry
dj00007@aol.com
Last edited by DJ00007; 05-09-2009 at 02:06 PM.
#3738
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
Hi, Greetings to everybody in the Forum. I am not a truck owner, yet, but I am very interested in the 2009 RAM 1500. It seems to ve a very nice truck. I joined so I can get info from the experts, so your help will be appreciated.
Regards, JB
Regards, JB
#3739
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
Hey all,
Just bought a '00 Ram 1500 4x4 with only 62k on it after turning in my leased Tundra. Needs a little work (ball joints, tires and some cosmetics). Forum looks to have lots of good info.
Just bought a '00 Ram 1500 4x4 with only 62k on it after turning in my leased Tundra. Needs a little work (ball joints, tires and some cosmetics). Forum looks to have lots of good info.
#3740
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
Hi everone my name is Matt im from Easton ,PA just got rid of my 1994 jeep xj with 5in lift 32 11.5 wheels for a 1996 dodge ram 1500 5.2 4x4 it real needs a lift time to see how high i can go befor i have to change trach bar and pitman arm and the least money well good to be here