so I noticed my truck was shifting a bit rough in lower gears (mostly 1sr to 2nd) so I went to change the fluid in the pan and found these three pieces sitting in my pan. No idea what they are or where they go the metal posts appear to be shearaed off on the ends and one is visibally broken on one end. As for the small barrel(?) it feels light for its size. Is not magnetic and is very slightly thinner at the ends. Any help would be very much so appreciated

 

Over running clutch! Hope it's not the one in the back of the case. This is what can happen when they go.

 

Any idea where I can get a replacement kit? I think it's a tcc boost valve. Haven't had any luck finding the kit

 

Need to rebuild the trans to fix that one.

 

Are you sure?? It's just the spring retainer that broke. I know I have to rip apart the trans. Would love to avoid purchasing a full rebuild for such a small part

 

No, but, I am fairly confident. If that roller in your pick is from one of the one-way clutches, it's only a matter of time before you get a serious failure, and grenade the trans.

 

After a lot of painful research the parts I need can all be found in shift kit. That's to those whom replied! Much appreciated