Have a 2012 Durango crew 3.6L. While driving, intermittently will stall. Rpms will fluctuate as its stalling like its starving for fuel, after, the ETC light and traction control light will come on. Will crank but not fire for around 10 to 15 mins. Ive replaced the throttle body and still the same thing. While it's cranking the rpms will jump a little. The ETC (lightning bolt) will flash. ETC and traction control light will come on at the exact same time. I have a video of the crank no start and what light are on but can't post here. I do have the recall for the fuel pump relay open so I will be getting that done bit from what I've read in other forums, that hasn't cured the issue so any info would be greatly appreciated

Thank you

 

Did you do a ETC re-learn?

 

yes if you're talking about turning the key on and 5 presses in 5 seconds, wait and then 20 seconds. If there's another way then no

 

That is resetting the oil reminder lamp. You will need a scanner to re-learn the ETC and you may as well does a re-learn on the crank and cam too.

 

I have not, did not know it had to be do e by a scanner..my scan tool does not do that but it is going to the dealer to get a recall done

Thank you

 

Did the ETC reset work? Are there easy instructions somewhere?