recharge a/c
#1
recharge a/c
So I replaced the comp, drier, cond, orifice tube, hoses, flushed the evaporator. evacuated for a few hours and when putting first can of freon in, the comp cycles on and the high side gauge pegs at 500 psi, then drops when it cycles off. Seems like a restriction somewhere but all is new and the evap blew clear with air pressure. Any ideas as where to look?
#4
#5
I installed a new condenser and orifice tube when I did all the other work. I guess its possible the new condenser is clogged somehow. Will report back if and when I find the problem. It's hard to find time to work on it as I just had open heart surgery a couple months ago and the wife ride's herd on me like nurse Ratchet
#6
I installed a new condenser and orifice tube when I did all the other work. I guess its possible the new condenser is clogged somehow. Will report back if and when I find the problem. It's hard to find time to work on it as I just had open heart surgery a couple months ago and the wife ride's herd on me like nurse Ratchet