HID Special $60.00 Shipped for Dodgeforum members
Record Breaker
Joined: Feb 2007
Posts: 1,552
Likes: 0
From: Rockville, MD (right outside DC)
never got my kit working or got the parts on my old truck. willing to give you guys another shot
i need an 5000k H11 kit for my low beams and a 5000k 9145 kit for my fogs. 2010 dodge ram 2500. slim ballast for both kits
i need an 5000k H11 kit for my low beams and a 5000k 9145 kit for my fogs. 2010 dodge ram 2500. slim ballast for both kits
Last edited by mdram43; Dec 29, 2010 at 12:47 AM.
Amateur
Joined: Dec 2009
Posts: 35
Likes: 0
My wife ordered 3 sets of lights from you guys for me for Christmas (Low Beam/High Beam/Fog Lights). They are for a 2010 Dodge Ram Laramie/CC. In reading posts regarding the lights flickering and interior dash light illuminating, I see that relays/harnesses are need in which you provide. My wife just ordered the kits without any special notes or messages, thus I need to get those for proper operation. Please advise.. I have also sent an e-mail regarding this.
Thanks in advance!
Doug
Thanks in advance!
Doug
Thread Starter
|
Former Vendor
Joined: Jun 2009
Posts: 682
Likes: 0
My wife ordered 3 sets of lights from you guys for me for Christmas (Low Beam/High Beam/Fog Lights). They are for a 2010 Dodge Ram Laramie/CC. In reading posts regarding the lights flickering and interior dash light illuminating, I see that relays/harnesses are need in which you provide. My wife just ordered the kits without any special notes or messages, thus I need to get those for proper operation. Please advise.. I have also sent an e-mail regarding this.
Thanks in advance!
Doug
Thanks in advance!
Doug
Amateur
Joined: Dec 2009
Posts: 35
Likes: 0
Order: 13052
Is it a capacitor or a Relay Harness? I have seen on the forum where the capacitors are not working. Above you mention, "we will include all the wire harness you need to prevent the light from flickering and error on dash". This is what I am going to need.
Thanks,
Doug
Amateur
Joined: Dec 2009
Posts: 35
Likes: 0
Veteran
Joined: Oct 2005
Posts: 337
Likes: 0
From: West Palm Beach, FL
I'm having issues with mine: 2006 Ram 1500. H13 Bi-xenon 6k Kit.
They came with some sort of extra harness with a small black box (possibly capacitors?), not sure exactly what it was. Then I had to get the relay kit to make them work properly. With the relay kit, they came with another harness of plugs (possibly the resistors?)
I left the first set in and added the relay, they work fine on low beam, but shen I switch to Hi-beam, only the drivers light hi-beam works and the passenger side stays on low beam. And when I switch back to Low-beam, they both turn off completely for a second, then turn back on.
I am not sure which set of extra harnesses to use? Can i use them both?
They came with some sort of extra harness with a small black box (possibly capacitors?), not sure exactly what it was. Then I had to get the relay kit to make them work properly. With the relay kit, they came with another harness of plugs (possibly the resistors?)
I left the first set in and added the relay, they work fine on low beam, but shen I switch to Hi-beam, only the drivers light hi-beam works and the passenger side stays on low beam. And when I switch back to Low-beam, they both turn off completely for a second, then turn back on.
I am not sure which set of extra harnesses to use? Can i use them both?
Thread Starter
|
Former Vendor
Joined: Jun 2009
Posts: 682
Likes: 0
I'm having issues with mine: 2006 Ram 1500. H13 Bi-xenon 6k Kit.
They came with some sort of extra harness with a small black box (possibly capacitors?), not sure exactly what it was. Then I had to get the relay kit to make them work properly. With the relay kit, they came with another harness of plugs (possibly the resistors?)
I left the first set in and added the relay, they work fine on low beam, but shen I switch to Hi-beam, only the drivers light hi-beam works and the passenger side stays on low beam. And when I switch back to Low-beam, they both turn off completely for a second, then turn back on.
I am not sure which set of extra harnesses to use? Can i use them both?
They came with some sort of extra harness with a small black box (possibly capacitors?), not sure exactly what it was. Then I had to get the relay kit to make them work properly. With the relay kit, they came with another harness of plugs (possibly the resistors?)
I left the first set in and added the relay, they work fine on low beam, but shen I switch to Hi-beam, only the drivers light hi-beam works and the passenger side stays on low beam. And when I switch back to Low-beam, they both turn off completely for a second, then turn back on.
I am not sure which set of extra harnesses to use? Can i use them both?