bed liner fender flares/bumper
#1
bed liner fender flares/bumper
yesterday and today i fixed some rust on the front bumper of the rango and used spray bed liner to cover it inside and out after sanding. it looked so good i decided to do my fender flares too.
i started using rust-oleum brand. it made a good base coat but sprayed in blotches. i bought some dupli-color bed liner at napa and it was 10 time better. the dupi-color covered very good and even. if you do this make sure you scuff up the paint before spraying.
[IMG][/IMG]
i started using rust-oleum brand. it made a good base coat but sprayed in blotches. i bought some dupli-color bed liner at napa and it was 10 time better. the dupi-color covered very good and even. if you do this make sure you scuff up the paint before spraying.
[IMG][/IMG]
#7
got er finished. did the rear bumper yesterday. washed and waxed today.
here's a couple pics of the texture.
DSCF0733.jpg?1411337419653&1411337420742
DSCF0737.jpg?1411337419653&1411337420742
DSCF0735.jpg?1411337419653&1411337420742
DSCF0736.jpg?1411337419653&1411337420741
here's a couple pics of the texture.
DSCF0733.jpg?1411337419653&1411337420742
DSCF0737.jpg?1411337419653&1411337420742
DSCF0735.jpg?1411337419653&1411337420742
DSCF0736.jpg?1411337419653&1411337420741
Trending Topics
#8
I would NOT have done the tailgate at all. That part looks really odd to me now. The grill is red with a dip into the black of the front bumper. The rear would look better with the same treatment. I would also have taken off the black rubber tread piece off before painting, or mask around it at least.
#9
I would NOT have done the tailgate at all. That part looks really odd to me now. The grill is red with a dip into the black of the front bumper. The rear would look better with the same treatment. I would also have taken off the black rubber tread piece off before painting, or mask around it at least.
Last edited by justang1999; 09-23-2014 at 07:31 AM.