About to do an A/C Compressor Replacement. Need some instructions.
#1
About to do an A/C Compressor Replacement. Need some instructions.
I have a 1998 Ram 1500 4x2. I'm about to replace the A/C compressor with a new (remanufactured) one and I need some instructions on how to do it using the tools I have available to me (or inexpensive ones I can buy at Advance, Auto Zone, or NAPA B&M stores).
I bought the kit on Ebay for $165. Seems like a great deal.
New Parts I have that came with the kit:
Tools I have to do the job:
Thanks in advance!
I bought the kit on Ebay for $165. Seems like a great deal.
New Parts I have that came with the kit:
- One Remanufactured Compressor: 10-553
- One New Drier: 60- 33098
- New Orifice Tube: 90- 38641
- One New Seal Kit: MT2507
- 8oz PAG100 Oil
- R-34a Refrigerant (how much do I need?)
- ??? Is there anything else I need to get this done?
Tools I have to do the job:
- Probably all of the wrenches and sockets I need to get it done
- Air compressor with standard set of attachments
- A vacuum. I don't really know what kind I need. Can my air compressor be used somehow?
- ??? That's what I'm asking in here for.
Thanks in advance!
#2
Need a vacuum pump. Something that you can hook to the low side pressure fitting, and draw a vacuum on the system. A rather esoteric tool, unless you can cobble one together. Another alternative would be to take it to a shop, and have THEM draw a vacuum on it for you, then, you just do the rest.
I think advertised capacity of the system is like 2.2 pounds of refrigerant, or something. Should be a sticker under the hood that will tell you. Get a bit more than you think you are really gonna need, as you can never completely empty the can into the system. (get at least one of the cans that comes with a gauge.)
Changing the compressor will be easy. One electrical connection, one connection for the lines. (I think there is only one, two lines, joined??) and four bolts. (don't forget to take the belt off.... ) Make sure the system is empty before you crack it open..... Then, just swap the compressor, replace the other parts... (orfice tube is supposedly not serviceable.... might have to check service manual for location..... also, you will need the quick disconnect tool for the a/c lines....) Once you have it all nicely reassembled, take it to get a vacuum job.... and if that holds, add refrig. to the correct pressure for ambient temp. Should be golden.
I think advertised capacity of the system is like 2.2 pounds of refrigerant, or something. Should be a sticker under the hood that will tell you. Get a bit more than you think you are really gonna need, as you can never completely empty the can into the system. (get at least one of the cans that comes with a gauge.)
Changing the compressor will be easy. One electrical connection, one connection for the lines. (I think there is only one, two lines, joined??) and four bolts. (don't forget to take the belt off.... ) Make sure the system is empty before you crack it open..... Then, just swap the compressor, replace the other parts... (orfice tube is supposedly not serviceable.... might have to check service manual for location..... also, you will need the quick disconnect tool for the a/c lines....) Once you have it all nicely reassembled, take it to get a vacuum job.... and if that holds, add refrig. to the correct pressure for ambient temp. Should be golden.
#3
#4
The new compressor does not come preloaded with oil. It came with an 8oz container of it though. Where do I put it in? The hole at the top?
Can someone link me to the quick release tool that I need?
#5
#7
Trending Topics
#8
#9
I just followed the service manual and jumpered the low pressure switch connector. After that, the clutch stayed engaged and i had cold air coming out of the vents.
I've only had this truck for about a month. I was sure that the reason the A/C didn't work was the compressor (stupid me).
When I took the cover off the low pressure I saw some green stuff that indicates that someone tried to find a leak before. I didn't see it anywhere else, so I guess there was no leak. Also, it seems to still have a charge as I checked the pressure and it's all the way to the end of the green bar on the dial.
I feel pretty stupid. I'm going to try replacing the low pressure switch and see what happens.
I've only had this truck for about a month. I was sure that the reason the A/C didn't work was the compressor (stupid me).
When I took the cover off the low pressure I saw some green stuff that indicates that someone tried to find a leak before. I didn't see it anywhere else, so I guess there was no leak. Also, it seems to still have a charge as I checked the pressure and it's all the way to the end of the green bar on the dial.
I feel pretty stupid. I'm going to try replacing the low pressure switch and see what happens.