automatic door unlocks reprogramming
#1
#4
Enter the vehicle and close all doors. Put on seatbelt (to avoid chiming). Put the key in the ignition and cycle the key to 'off' and 'on' four times ending in the off position. Press the drivers door lock switch to 'unlock'. A single chime shoud sound indicating the change. This is on page 18 in the manual,
FF
FF
#6
You can download the maual form Dodge's site (left side under 'vehicle information'):
https://www.dodge.com/hostb/crossbrand/owners/en/
FF
https://www.dodge.com/hostb/crossbrand/owners/en/
FF
#7
That won't set the doors to unlock upon putting the lever into "Park" position, but it will set it to unlock all doors as soon as the driver's or passenger's front door is opened.
Fascistfaction's directions are spot on, worked in the wife's 2006. You can also get a manual pretty inexpensively off of eBay, if you want it in paper form.
Fascistfaction's directions are spot on, worked in the wife's 2006. You can also get a manual pretty inexpensively off of eBay, if you want it in paper form.
Trending Topics
#8
Thank you for your help. I have downloaded a manual, and will likely wait to see if the dealer will program this for me as I need a new instrument cluster. My illuminated entry is not working, and per the dealer needs a new cluster. They will provide same. Incidentally, I am getting great highway gas mileage with my Hemi, at least according to the computer. Appears to be about 22.5 mpg at 55 mph on cruise control. That number drops appreciably as your speed approaches 65-70.
#9
#10
Enter the vehicle and close all doors. Put on seatbelt (to avoid chiming). Put the key in the ignition and cycle the key to 'off' and 'on' four times ending in the off position. Press the drivers door lock switch to 'unlock'. A single chime shoud sound indicating the change. This is on page 18 in the manual,
FF
FF
I have an '06 Durango also that i bought in '09. The locks used to unlock for me when in park and the drivers or passangers door was opened. After a few months this stopped working and I tried several times the steps on page 18 and it doesn't work. Has anyone heard of this problem? Thanks.