2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

whining sound while turning

Thread Tools
 
Search this Thread
 
  #1  
Old 08-05-2007, 08:19 PM
kingofnothing14's Avatar
kingofnothing14
kingofnothing14 is offline
Thread Starter
Join Date: Jan 2007
Location:
Posts: 21
Likes: 0
Received 0 Likes on 0 Posts
Default whining sound while turning

I noticed I have a warped kinda whining sound when making slow turns, more with hard right turns, top speed of about 15...it's coming from the wheel well....any ideas?

 
  #2  
Old 08-05-2007, 08:22 PM
timwag2001's Avatar
timwag2001
timwag2001 is offline
All Star
Join Date: May 2006
Location: MA
Posts: 775
Likes: 0
Received 0 Likes on 0 Posts
Default RE: whining sound while turning

hows your power steering fluid doing?
 
  #3  
Old 08-05-2007, 08:38 PM
kingofnothing14's Avatar
kingofnothing14
kingofnothing14 is offline
Thread Starter
Join Date: Jan 2007
Location:
Posts: 21
Likes: 0
Received 0 Likes on 0 Posts
Default RE: whining sound while turning

it's good i changed it about 6 months ago...
 
  #4  
Old 08-05-2007, 08:47 PM
aim4squirrels's Avatar
aim4squirrels
aim4squirrels is offline
Legend
Join Date: Jul 2007
Location: DFW, Texas
Posts: 7,843
Likes: 0
Received 12 Likes on 12 Posts
Default RE: whining sound while turning

Constant sound or cadenced (at regular intervals)? Does it speed up/get higher when you go faster?


I had a passenger side wheel bearing go out that I only noticed during turns to start with.
 
  #5  
Old 08-05-2007, 08:49 PM
ryans590's Avatar
ryans590
ryans590 is offline
Record Breaker
Join Date: Jan 2006
Location:
Posts: 1,893
Likes: 0
Received 1 Like on 1 Post
Default RE: whining sound while turning

im gonna guess a wheel barring on u-joint

to check wheel barring, lift the corner of the truck up so the tire is off the ground try to wiggle it top to bottem if it wiggles its a bad barring
u-joint with the tire still in the air spin the tire (in 2wd) look at the axle u joint if there is slop in it then its bad
 
  #6  
Old 08-05-2007, 09:35 PM
timwag2001's Avatar
timwag2001
timwag2001 is offline
All Star
Join Date: May 2006
Location: MA
Posts: 775
Likes: 0
Received 0 Likes on 0 Posts
Default RE: whining sound while turning

ive never heard of that for a bearing. thats how i check my ball joints.
a lot of times you can do a visual inspection of the ujoint in the axle. you can usually see the damage on the caps.
doesnt the 2 wd have bearings and the 4 wd have ujoints?
 
  #7  
Old 08-05-2007, 09:42 PM
Captain Squalus's Avatar
Captain Squalus
Captain Squalus is offline
Record Breaker
Join Date: Feb 2007
Location:
Posts: 1,603
Likes: 0
Received 0 Likes on 0 Posts
Default RE: whining sound while turning

ORIGINAL: kingofnothing14

I noticed I have a warped kinda whining sound when making slow turns, more with hard right turns, top speed of about 15...it's coming from the wheel well....any ideas?

I had a whining sound but I got rid of the Bitch so I don't here it anymore
 
  #8  
Old 08-05-2007, 09:46 PM
padodgeram's Avatar
padodgeram
padodgeram is offline
Record Breaker
Join Date: Jul 2006
Location: PA
Posts: 2,440
Likes: 0
Received 1 Like on 1 Post
Default RE: whining sound while turning

4wds have bearings called the hub assembley
 
  #9  
Old 08-05-2007, 09:49 PM
timwag2001's Avatar
timwag2001
timwag2001 is offline
All Star
Join Date: May 2006
Location: MA
Posts: 775
Likes: 0
Received 0 Likes on 0 Posts
Default RE: whining sound while turning

with ujoints, correct?
 
  #10  
Old 08-05-2007, 10:05 PM
motorbrreath's Avatar
motorbrreath
motorbrreath is offline
Record Breaker
Join Date: Jul 2007
Location: Georgia
Posts: 1,771
Likes: 0
Received 0 Likes on 0 Posts
Default RE: whining sound while turning

ORIGINAL: timwag2001

with ujoints, correct?
yes i had the same thing happen to me, except front left tire. bearing assembly went out, but they didnt say anything about the u joint. and 5 days later its squeakin again so its goin back in. im sure this time it will be the u joint.be prepared to dish out 300 for the bearing assembly.
 


Quick Reply: whining sound while turning



All times are GMT -4. The time now is 03:22 AM.