When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
hi guys in my last post ( https://dodgeforum.com/forum/3rd-gen...ight-help.html ) we found the problem with the truck a 2004 4.7L Ram 1500 SLT. it had water in cylinder 1. now im going to change the gasket, should i change both gasket or just the one in cylinders 1, 3, 5, 7?
also if you have any links or videos that can help me with this job ill be grateful
I have the same problem with my 02 4.7.i thinking of droping in aa 03 hemi just cause i have it.any info would help.maybe i don't wana swap the motor?I'm no Mr.goodwrench. help
yes change both sides while you have it apart. Chances are the other side might be bad also or soon to be. I'd also have the heads check while you have it apart anyways.the 4.7 heads don't like to get hot