Lights going out in cup holders
#4
Well, partially. I opened up the console today... here is what I discovered...
They aren't bulbs, they are "electroluminescent rings" which all local dealers say "they don't carry them."
I did some research on google and ran into a post on another forum, can anyone give me any suggestions? I'm going to call the Chrysler hotline tomorrow and see if they have the part. On the "electro ring" tape stuff it has the number "64947" but is not a part number I can find.
Please read the post at this forum: http://www.caliberforumz.com/archive...hp/t-1344.html
Which also gives you a link to here... http://world-electroluminescent.com/..._products.html
Anyone think I should try these or can anyone find the factory? I can't find 'em.
Thanks,
Evan
****WHERE IT IS CIRCLED IN RED IS WHERE THE LIGHTING DOESN'T WORK... SEEMS TO BE "BURNT OUT"*****
They aren't bulbs, they are "electroluminescent rings" which all local dealers say "they don't carry them."
I did some research on google and ran into a post on another forum, can anyone give me any suggestions? I'm going to call the Chrysler hotline tomorrow and see if they have the part. On the "electro ring" tape stuff it has the number "64947" but is not a part number I can find.
Please read the post at this forum: http://www.caliberforumz.com/archive...hp/t-1344.html
Which also gives you a link to here... http://world-electroluminescent.com/..._products.html
Anyone think I should try these or can anyone find the factory? I can't find 'em.
Thanks,
Evan
****WHERE IT IS CIRCLED IN RED IS WHERE THE LIGHTING DOESN'T WORK... SEEMS TO BE "BURNT OUT"*****
#7
Trending Topics
#8
#9
Got it fixed... here's what to do...
Power inverter (just in case the voltage is different from the stock one)
p/n: CL-ISC-12V-3-8FT
http://www.coolight.com/product-p/cl-isc-12v-3-8ft.htm
$4.50
2.3mm Wire - GN - Green
http://www.coolight.com/category-s/53.htm
It's $1.20 a foot, you only need 2 feet tops (3 if you want to be safe)
You will need to know how to use a soldering gun. They will ship you step by step directions. I'm not perfect at this stuff, but luckily I had help from my pops. It looks awesome now, back to normal.
-Evan
Power inverter (just in case the voltage is different from the stock one)
p/n: CL-ISC-12V-3-8FT
http://www.coolight.com/product-p/cl-isc-12v-3-8ft.htm
$4.50
2.3mm Wire - GN - Green
http://www.coolight.com/category-s/53.htm
It's $1.20 a foot, you only need 2 feet tops (3 if you want to be safe)
You will need to know how to use a soldering gun. They will ship you step by step directions. I'm not perfect at this stuff, but luckily I had help from my pops. It looks awesome now, back to normal.
-Evan