speaker set up q's
#22
#23
RE: speaker set up q's
Well the install went smooth.Door speakers are LOUD as heck. (still need to be tuned with the rest of the system)
Everything works great except the subs they play great at low volume but as soon as it starts bumping it cuts out for a bit. I replaced the amp wht another. Still continues to cut out. So I am left with the headunit? or subs? The subs are 10" SVC JBL I have 2. If its the subs why would both cut out if it was the subs?
As for the headunit I tried swithing from the Non-Fading preouts to the Rear Preouts and it still continues. I tried running the subs (as trial) off a Kicker kx350.4 bridged to the ONE amp. I also tried running it off a Pioneer GM-7100m amp no difference.
I was thinking if it as the wire size then it would blow the fuse under the hood, right.
The headunit has 4.5 preouts and is a kenwood kdc-x915.
And last but not least they preouts are cheapy one. I have ran these ones before off a Kicker z240@4ohms and never had a problem though.
Everything works great except the subs they play great at low volume but as soon as it starts bumping it cuts out for a bit. I replaced the amp wht another. Still continues to cut out. So I am left with the headunit? or subs? The subs are 10" SVC JBL I have 2. If its the subs why would both cut out if it was the subs?
As for the headunit I tried swithing from the Non-Fading preouts to the Rear Preouts and it still continues. I tried running the subs (as trial) off a Kicker kx350.4 bridged to the ONE amp. I also tried running it off a Pioneer GM-7100m amp no difference.
I was thinking if it as the wire size then it would blow the fuse under the hood, right.
The headunit has 4.5 preouts and is a kenwood kdc-x915.
And last but not least they preouts are cheapy one. I have ran these ones before off a Kicker z240@4ohms and never had a problem though.
#27
#28
#30