Remote Door Locks
#11
#12
Don't look for the wires in the door itself you'll want the wires under the dash near the drivers kick panel.
You'll see where to pick them up in this thread
https://dodgeforum.com/forum/1st-gen...ess-entry.html
You'll see where to pick them up in this thread
https://dodgeforum.com/forum/1st-gen...ess-entry.html
#13
ok
I thank you big time but i have tryed that pink ad violet one switch side to 87a and the other side of the cut pink and violet to 30 87 and 86 12 volts fuesd and85 to remote should i be useing the pink and black and orange and black thanks for the pics but i must be stupid cause i tryed that the side i think is motor reads power from passenger switch when i try it so is it the other wires then
#15
#17
ok here is a pic of my relays
Ok do i cut just the orange and violet and pink and violet or do i cut the motor wires to
i no if i cut the pink and violet on the drivers side that side quits working and pass side one way
but the same goes on the pass side if i cut pink and violet there that side quits and the drivers side one way
The wires are as follows orange and violet pink and violet red 12 v center and two black wires on the drivers side switch
pass side is orange and violet pink and violet red center 12v orange and black pink ad black
Last edited by bertbart; 01-09-2011 at 02:46 PM.
#19
#20