1st Gen Dakota Tech 1987 - 1996 Dodge Dakota Tech - The ultimate forum for technical help on the 1st Gen Dakota.

Broken Coil Front Spring - Where to get

Thread Tools
 
Search this Thread
 
Old Jun 2, 2018 | 08:11 PM
  #1  
WolfStar's Avatar
WolfStar
Thread Starter
|
Professional
Joined: May 2012
Posts: 168
Likes: 3
Default Broken Coil Front Spring - Where to get

Hello,

I lived in Quebec and am the owner of a 1995 Dodge Dakota Sport, Regular Box with the 5.2L V8. I heard a banging sound recently going over bumps and thought it was my ball joints. However, it turned out to be a broken coil spring. Part of the coil was busted off near the bottom and flopping around. I need a replacement but I can't find the part anywhere. The OEM part is 52007004, but Chrysler has long since discontinued it.

What is annoying is that Moog, Centric and AC Delco seem to sell replacements for the 2.5L and 3.9L but not the 5.2L. Any suggestions? This is super frustrating - any help would be appreciated.

Thanks!
 
Reply
Old Jun 2, 2018 | 08:35 PM
  #2  
onemore94dak's Avatar
onemore94dak
Champion
Photogenic
Photoriffic
Shutterbug
Joined: Sep 2013
Posts: 2,724
Likes: 153
Default

I did some searches and found what you did. It could be that they used the same spring in all three. One guy on eBay was selling some for an 87-96 Dak. Nothing I saw indicated the 5.2. You may have to wait for Monday to call someone and ask if what you see works on the 5.2 rig.Or cross search other years or even the 5.9L to see if the same part number turns up.
 
Reply
Old Jun 2, 2018 | 08:43 PM
  #3  
WolfStar's Avatar
WolfStar
Thread Starter
|
Professional
Joined: May 2012
Posts: 168
Likes: 3
Default

Originally Posted by onemore94dak
I did some searches and found what you did. It could be that they used the same spring in all three. One guy on eBay was selling some for an 87-96 Dak. Nothing I saw indicated the 5.2. You may have to wait for Monday to call someone and ask if what you see works on the 5.2 rig.Or cross search other years or even the 5.9L to see if the same part number turns up.
Thanks for the info. I saw one coil being sold on ebay, but it doesn't seem to be there any more.

I found this interesting site:

http://www.industrialchassisinc.com/...ota-based-ifs/

If you scroll down to the "Coil Spring" section, it would appear that the Moog CC772 might work. Maybe I need to talk to Moog.

Good call about the 5.9L, maybe I can check that out.
 
Reply
Old Jun 2, 2018 | 09:00 PM
  #4  
WolfStar's Avatar
WolfStar
Thread Starter
|
Professional
Joined: May 2012
Posts: 168
Likes: 3
Default

On this website I can see that there are several springs available:

https://www.moparpartsoverstock.com/.../52007004.html

If I look at #32 I can see that each spring seems to fit the 2.5L, 3.9L and 5.2L. There is a different number for each colored spring:

52007003 Red Tag 2020
52007004 Yellow Tag 2125 (The one I need)
52007005 Orange Tag 2280
52007006 Blue Tag 2410
52007007 Green Tag 2540

I guess that is the GVW weight in kilograms?
 
Reply
Old Jun 2, 2018 | 09:14 PM
  #5  
RalphP's Avatar
RalphP
Champion
Joined: Jan 2013
Posts: 4,737
Likes: 374
From: Northwest Louisiana
Default

Replace both as a matched set; at worst, the 3.9 springs will ride a bit lower if anything.

RwP
 
Reply
Old Jun 2, 2018 | 09:32 PM
  #6  
WolfStar's Avatar
WolfStar
Thread Starter
|
Professional
Joined: May 2012
Posts: 168
Likes: 3
Default

Originally Posted by RalphP
Replace both as a matched set; at worst, the 3.9 springs will ride a bit lower if anything.

RwP
For sure. From the reading I've been doing the 5.2L is around 110lb heavier than the 3.9L.

If I take the spring rate of the CC772 as 716 lb/in as in the chart from one of the links above. Then 110 lb / 716 lb = 0.154" lower.

I think 5/32" should not be significant.
 
Reply
Old Jun 2, 2018 | 09:33 PM
  #7  
RalphP's Avatar
RalphP
Champion
Joined: Jan 2013
Posts: 4,737
Likes: 374
From: Northwest Louisiana
Default

Heh. I could lose weight and save that much *grins*

RwP
 
Reply
Old Aug 8, 2018 | 10:59 AM
  #8  
dobaroy's Avatar
dobaroy
Veteran
Joined: Jun 2010
Posts: 460
Likes: 0
From: Ontario, Canada
Default

WolfStar, we have the same problem with our '92 Dak 5.2 and just wondered which coil springs you went with. Thanks
 
Reply
Old Aug 9, 2018 | 08:05 AM
  #9  
WolfStar's Avatar
WolfStar
Thread Starter
|
Professional
Joined: May 2012
Posts: 168
Likes: 3
Default

Originally Posted by dobaroy
WolfStar, we have the same problem with our '92 Dak 5.2 and just wondered which coil springs you went with. Thanks
i bought the Moog CC772 (the spring for the 3.9L). The truck should only sit 5/32 inch lower. It seems the spring rates are higher on the Moogs than factory. This may mean a harsher ride. Haven’t put the new springs in yet. It’s on my to-do list.
 
Reply
Old Aug 11, 2018 | 08:33 PM
  #10  
dobaroy's Avatar
dobaroy
Veteran
Joined: Jun 2010
Posts: 460
Likes: 0
From: Ontario, Canada
Default

Thanks WolfStar, we just ordered the CC772 coil springs for our 92, 5.2L from RockAuto.
 
Reply



All times are GMT -4. The time now is 01:29 AM.