1st Gen Dakota Tech 1987 - 1996 Dodge Dakota Tech - The ultimate forum for technical help on the 1st Gen Dakota.

No power to ecm?

Thread Tools
 
Search this Thread
 
  #21  
Old 01-25-2019 | 12:13 AM
96daksport's Avatar
96daksport
Thread Starter
|
Amateur
Joined: Apr 2018
Posts: 29
Likes: 0
Default

Issue is resolved, I finally narrowed it down to a bad ECM after checking all powers and grounds to the ECM. I can't thank you guys enough for helping me relearn basic ohms law and diving in wiring diagrams via the FSM. This thing goes like stink by the way!5.9 Magnum + shortbox Dakota Sport = life. Off to the exhaust shop tomorrow, after that it's datalogging time to get the tune dialed in by Torrie from Unleashed! (Ignore the wideband reading only at 14.9, the sensor is not hooked up yet) https://vimeo.com/user94306357/revie...383/bb52e03da3

 

Last edited by 96daksport; 01-25-2019 at 12:20 AM.
  #22  
Old 01-25-2019 | 09:22 AM
HeyYou's Avatar
HeyYou
Administrator
Joined: Apr 2010
Posts: 82,830
Likes: 3,435
From: Clayton MI
Default

That's gonna be fun.
 



Quick Reply: No power to ecm?



All times are GMT -4. The time now is 03:42 AM.