Ive been seriously looking at getting new plugs and wires
Whats your thoughts on E3's?
My friend runs them in his 03 pace Monte nad his Honda CRX Si and swears by them

Then for wires I have been thinking about 10mm
http://www.summitracing.com/parts/TAY-79682/
Any pros or cons to using 10mm wires?

Then I would like to get a ignition coil but all I can find for the D is an Accel and thats for up to 99
Any one have any insight for me.

Thanks for any help guys

 

E3s suck, avoid. Halos suck, avoid. Platinums from anyone suck, avoid. Use Autolite 3923s or stocker Champions.

10mm are way to big, avoid. 8m or 8.5mm is what you want.

MSD coil (using the Accel adapter) or a NAPA Echlin. Stocker coil is a good choice too.

HTH,

IndyDurango

 

Indy would you mind shedding more light on the MSD coil
Part number or name so i can find it.
And info on this Accel adapter.
Thanks for your input!

 

http://www.msdignition.com/Products/...il,_2_Pin.aspx

http://www.summitracing.com/parts/MSD-8228

http://www.accel-ignition.com/Produc...minselection=4

http://www.summitracing.com/parts/ACC-140021AH/

 

Excelent
TY so much Indy!!

 

Yw

 

well that was fast. indy to the rescue again lol

 

 

Did I talk you out of the live wires then Indy?????.......LOL
https://dodgeforum.com/forum/1st-gen...ntifreeze.html


Anyway,

A muilitude of issues have been caused with MSD coils on 2000-2003 Durangos and I don't know why. This is what I'm running and I personally think it's the best.
Cap and Rotor Change Out
Part Numbers for 5.9 Performance Ignition

Check out the info in this:
Longevity & Power Of Your Rig!

 

I use stock coil packs with Champion Iridium with Taylor Thundervolt wires (8.2mm) and would like to change to MSD coil pacts in the future,
FF