Rear Wiper Swap To A GC/T&C Wiper?
#1
![Exclamation](https://dodgeforum.com/forum/images/icons/icon4.gif)
So I was reading around about people who swapped out their rear arm assembly for a Gen 2 wiper setup. I thought it was a great idea until I saw that it wiped less area. I decided to measure the wiper/arm on my step dads Town and Country and it has the same measurements. Even the wiper was 16", and on my D I upped it to 17" to get more coverage. It looks like it would be a direct fit replacement. Has anyone tried this before?
#2
#3
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
Well as far as I know, new arms don't have the grooves on the shaft hole anyhow. The metal in the end is semi hard but soft enough to take a print of the motor shaft and create grooves. And as far as the blade being shorter i think mine had a 15" on it as OEM or maybe it was a 16". But the new arm design should hold the wiper tighter against the glass anyhow.
#4
#5
#6
#7
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
The 2nd gen. stuff will cost you around $45 give or take. Maybe ebay might have some decent stuff cheaper.
Or you can always just go back to the dealer and get one, but this time go at 3 in the morning and get it from one of their new cars out in the lot, but you didn't hear that from me haha.
Or you can always just go back to the dealer and get one, but this time go at 3 in the morning and get it from one of their new cars out in the lot, but you didn't hear that from me haha.
Trending Topics
#8
#9