Yeah, I know there are numerous threads about the dreaded P0442 code, and that is what i have now. Just wanted you guys to check something out...look at this link....looks just like the hoses coming off of my Evap canister underneath the truck.....what do you guys think?

Or could this be for something else?

https://www.napaonline.com/Catalog/C...+50022+2022007

 

you're not gonna loose out much if it isn't the right one.. its just a hose.

 

those look right, but when i did mine i just used fuel rated hose and build my own lines

 

what size hoses did you use?

 

check the writeup in the FAQ thread, its got all my information in it

https://dodgeforum.com/forum/1st-gen...ml#post2195984

 

they are the evap hoses that go under the truck. most of the time the dreaped evap code on these trucks is normally just a broken line. the vents on our trucks are consealed and dont normally burn out

 

Well I have ordered the hoses anyway...hope this cures it...already replaced the gas cap....looked at a lot of the lines under the hood...wonder if the canister purge solenoid went bad...coarse I can't tell if it has or not

 

yea i havnt figured a way to test that one yet either, if you figure something out let me know

 

Well, when I get the hoses replaced at the evap canister, and I still get the CEL..just might go ahead and replace the Purge solenoid anyway...its not that much at Autozone...after that...LDP?

 

Those hoses are the same size/shape as the Mopar emissions hose kit I have bought (two times now) at the dealer for around $10. Seeing that the Napa price is almost half the OEM price you can't lose. I've seen that exact kit on a shelf in a Napa store I often frequent and thought it was cool that they sold that specialized hose kit.

It was the cure for one of my truck's P0442 conditions. The other truck I replaced all the hoses, even though these hoses still looked good. I kept the old ones for spares.