need help with this trans rebuild
Hall Of Fame
Joined: Jun 2005
Posts: 14,228
Likes: 19
From: Riverton, UT
Don't wanna highjack the thread but may I ask how to identify the model of my tranny? I to have a 99 5.9 4x4.
99go<----- Your transmission is a 42-44RE
Torqued<---- Have you tried this?
Disconnect the electrical connector on the drivers side, shortly behind the shift linkage. (should be like an 8 pin connector) Take the truck for a drive. Bear in mind, you will not have ANY automatic function AT ALL. You will have to shift each gear manually. (and o/d will never engage.....) If the trans actually shifts this way, replace governor pressure sensor and solenoid. The other thing you could try is the transmission output speed sensor.
Hall Of Fame
Joined: Jun 2005
Posts: 14,228
Likes: 19
From: Riverton, UT
Try it first.
The reason I ask is because if it acts fine then it is electronic, not hydraulic and that is good. Remember you have to shift manual like a manual transmission because you will not have any automatic shifting because the PCM will be unincorporated.
The reason I ask is because if it acts fine then it is electronic, not hydraulic and that is good. Remember you have to shift manual like a manual transmission because you will not have any automatic shifting because the PCM will be unincorporated.
Thread Starter
|
Registered User
Joined: Sep 2011
Posts: 9
Likes: 0
Hydra i never did get a chance to unplug that eight pin connector but i will this weekend. By the way do you have another link were i can download that a518 rebuild video that gobble had posted? The sit that is in the faq section say's
Thread Starter
|
Registered User
Joined: Sep 2011
Posts: 9
Likes: 0
Hydra i never did get a chance to unplug that eight pin connector but i will this weekend. By the way do you have another link were i can download that a518 rebuild video that gobble had posted? The site that is in the faq section say's it has reach its limit on bandwidth "33mb". Just wondering because that video seems very usefull
Hall Of Fame
Joined: Jun 2005
Posts: 14,228
Likes: 19
From: Riverton, UT
Yes I have the PDF for the tear down on the 46RE. Actually I have a few things. I don't have the video, it's like 800+ megs!
Now are you talking in this link: http://pwp.att.net/p/s/community.dll...pid=404015&ck=
because it looks like everything is still working?
Now are you talking in this link: http://pwp.att.net/p/s/community.dll...pid=404015&ck=
because it looks like everything is still working?