Did I just read this?


A T/S lift is a Torsion/Shackle lift. This is not a name brand and that sales man/tech over at 4 wheel parts don't know ****!


All you do is crank the torsion bars (8 turns from OEM height) for the front and add a Belltech 6400 shackle to the rear springs replacing the OEM smaller shackle. Then get a 4 wheel alignment to finish it off.

 

ok im an idiot i figured it out. and it looks good. i only did the front though.

 

LOL......So is the front setting higher than the rear, and why would you do it?

 

no the front is slightly lower cause i normaly drive with the airbags full. but i didnt do a full 8 rotations so 8 might make it leve.

 

Remember to have it aligned.


BTW<---- You and I are the only ones here with air bags on the D that I know of.

 

yea im gonna do that ths week. so do u have just bags or do you have a lift also?

 

I don't have a lift. I'm running OEM. I have Firestone Sport-Rite 2222 air bags installed. I want to know if they can be installed with a 2 inch T/S lift? The main issue is I'm asking "is there enough room to fully extend the rear springs with the T/S lift installed"?

Next I want to find some better HD shackles other than the Belltech 6400.

 

i have airbags in my d . . . . one in the steering wheel and one in teh dashboard above the glove box . . .










o wait, you didnt mean those airbags did you

 

These!

 

hahaha ill take 3 sets of those hydra