Question about atx to mtx swap
#11
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
ORIGINAL: das2123
No such thing. 95 NYG ACR's all came with an MTX!
ORIGINAL: kris95neonspt
and found a nyg thats a atx
and found a nyg thats a atx
#12
#13
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
hahahahahah oh my bad man, sorry. I dont know why I said that! I fixed it though haha sorry oh and I think what you meant to say is that you take the middle wire whcih is black and yellow and run that to one of the yellow wires on the clutch pedala dn then ground the other yellow wire. But my question is what do you have to do if you want to have both your reverse lights working and also have to press the clutch in to start the car?
#14
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
From what i understand is the mtx has a 2 plug instead of a 3 plug and you wire the other 2 wires into the 2 plug for the reverse lights to work.On the
mtx and the yellow and black wire just goes from the front of the tranny back to the yellow wire on the clutch assembley.
mtx and the yellow and black wire just goes from the front of the tranny back to the yellow wire on the clutch assembley.
#15
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
ORIGINAL: kris95neonspt
From what i understand is the mtx has a 2 plug instead of a 3 plug and you wire the other 2 wires into the 2 plug for the reverse lights to work.On the
mtx and the yellow and black wire just goes from the front of the tranny back to the yellow wire on the clutch assembley.
From what i understand is the mtx has a 2 plug instead of a 3 plug and you wire the other 2 wires into the 2 plug for the reverse lights to work.On the
mtx and the yellow and black wire just goes from the front of the tranny back to the yellow wire on the clutch assembley.
#16
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
Yeah thats how i understand it. I will have pics post of the car some time this week hopefully and don't mind the graphics on it i don't know what they were thing they are some kind of diy black electrial tape side graphics and it has princess written across the windshield lol.
#18
#20
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
alright so do any of you have an actual wire diagram for this because all i hear is you guys naming off colors. i have a 97 plymouth neon, and just did the 5speed swap from a 2002 neon. i have the automatic harness pluged in right now. just need some insight. when i go to crank it i get nothing. i know it has to do with the neutral safety switch just want a better explanation