ok i have a 96 neon and a 95 neon now a hope i dont lose anyone on this but would it be possible to put the head from the 96 on to the block of the 95 the reason i ask is cuz the the head on the 95 is busted it i think the cam shaft was not toucrked right and over spun and i have blown the block on the 96 i snaped rods 1 and 2 and they punched thorow the front and back so i was thinking if i could mix and matck the to motors into one please help i miss my car

 

I've got a 95 Neon and I swapped the sohc from a 97 to a 95 alls that I had to do is swap the sensors since the 95 is obd1 vs obd2 You shouldnt have a problem swapping Sohc heads.

 

so then it is possible do you remember witch sencers had to be swaped

 

I think just the cam sensor. Which Intake and exhaust manifold r u gonna use? It shouldn't really matter just check the pin outs f th sensors on the had ur swapping to the one thats on the motor now.

 

Swap the Sensor from the 95 head to the 96 head that ur gonna use.

 

dude you rock thanks alot i thought it would work but i wasnt sure if you have friends on hear can you have them read this so i can have more confermation thanks alot

 

I have a 95 head on my 96, so you can go the other way as well. All I had to change was the CTS.

 

whats the cts i have never heard of that is it easy

 

Coolant temp sensor. It's on the driver's side of the head and it's easier to change it while the head is off the car.

 

coool now how do i check to make sure the block is still good do i just a comprestion tester and if i swap the heads im going to need a new head gaskit right