1st Gen Neon 1995 through 1999 Neons

Got some bad news today

Thread Tools
 
Search this Thread
 
  #1  
Old 04-04-2008 | 04:49 PM
p8ntballa113's Avatar
p8ntballa113
Thread Starter
|
Professional
Joined: Feb 2008
Posts: 157
Likes: 0
From:
Default Got some bad news today

Went and got my flat tire fixed today and had the mechanic check out my car and see if the bearings were bad. He drove it and says he thinks both sides are bad and i found out it's gonnna cost me between $550 and $600 to have them replace both sides. So that sucks...
 
  #2  
Old 04-04-2008 | 05:04 PM
DOHCgarrett t3's Avatar
DOHCgarrett t3
Record Breaker
Joined: Nov 2006
Posts: 1,786
Likes: 0
From: Detroit Michigan
Default RE: Got some bad news today

hell do them yourself. you will save a hell of a lot of money even if you have to buy a few special tools to do them with... and we are talking aobut wheel bearings right?
 
  #3  
Old 04-04-2008 | 06:23 PM
p8ntballa113's Avatar
p8ntballa113
Thread Starter
|
Professional
Joined: Feb 2008
Posts: 157
Likes: 0
From:
Default RE: Got some bad news today

I took it to a second shop and they told me only one side was bad and that it would be $300 max. so i'm going with them. I live in the dorms at school and can't do it myself... yes, the wheel bearings.
 
  #4  
Old 04-04-2008 | 06:27 PM
spudsterier's Avatar
spudsterier
Legend
Joined: Feb 2006
Posts: 9,284
Likes: 1
From: mendota, illinois
Default RE: Got some bad news today

damn...$300????
i guess im drastically undercharging when i do work like that....
around here it costs $30 for the bearing and then $10 to get the new one pressed in...
$40 total and about $20 for me to do the labor
 
  #5  
Old 04-04-2008 | 06:27 PM
DOHCgarrett t3's Avatar
DOHCgarrett t3
Record Breaker
Joined: Nov 2006
Posts: 1,786
Likes: 0
From: Detroit Michigan
Default RE: Got some bad news today

yeah that makes it harder to do depending on wher eyou live but hell i didn my radiator in the parking lot of my apartment i didnt give a crap and next im doing a heatercore [&:]thats going to be a bitch on my crown vicd have to pull about everything apart on the dash
 
  #6  
Old 04-04-2008 | 06:32 PM
p8ntballa113's Avatar
p8ntballa113
Thread Starter
|
Professional
Joined: Feb 2008
Posts: 157
Likes: 0
From:
Default RE: Got some bad news today

He said it is $156 for the bearing assebly (have to get the whole thing), $104 for labor, $5 for parts, and $40 for alignment. He said when he gets it all apart he might be able to just replace once bearing and it would be like $75 less. Otherwise they have to replace the whole assebly.
 
  #7  
Old 04-04-2008 | 06:42 PM
spudsterier's Avatar
spudsterier
Legend
Joined: Feb 2006
Posts: 9,284
Likes: 1
From: mendota, illinois
Default RE: Got some bad news today

you can get a whole bearing/hub assenbly from autozone for $72......
$156 is rediculous....you better hope its gold plated for that price[&:]
 
  #8  
Old 04-04-2008 | 06:44 PM
p8ntballa113's Avatar
p8ntballa113
Thread Starter
|
Professional
Joined: Feb 2008
Posts: 157
Likes: 0
From:
Default RE: Got some bad news today

ORIGINAL: spudsterier

you can get a whole bearing/hub assenbly from autozone for $72......
$156 is rediculous....you better hope its gold plated for that price[&:]
It is the whole hug/bearing assebly... could it be possible that it's a better quality assebly or am i just getting ripped off?
 
  #9  
Old 04-04-2008 | 06:47 PM
spudsterier's Avatar
spudsterier
Legend
Joined: Feb 2006
Posts: 9,284
Likes: 1
From: mendota, illinois
Default RE: Got some bad news today

it could be the right price if he is ordering it from a dealership....

maybe you should buy the bearing/hub and then take it to the guy and have jim just put it on....then it might save you some money
 
  #10  
Old 04-04-2008 | 06:52 PM
p8ntballa113's Avatar
p8ntballa113
Thread Starter
|
Professional
Joined: Feb 2008
Posts: 157
Likes: 0
From:
Default RE: Got some bad news today

I live in Bozeman, MT and don't have that many option for auto stores. If i was back home in seattle it would be a different story and i might even do it myself. Plus dad is paying for it and i just want it fixed before i drive home for summer.
 


Quick Reply: Got some bad news today



All times are GMT -4. The time now is 12:28 PM.