well i did this today, cept i cheated. i didnt solder, i just used one of the splice things. and it works great. so something to think about if you arent comfortable with your soldering skills.

 

Hi guys.. I'am Adan...i'am from panama..i want use my foglights..whitout havig to turn on the headlights switch... i need a picture so I can be able to do this job.. i need a picture from the fog light harness..

Thanks...

 

hola Adan
didnt you read any of this post?

follow these instrutions
[ol][*]Pull out the fog light/rear defogger panel[*]Cut the violet with white tracer wire, leaving as much as possible attached to the connector for the fog light switch.[*]Tape and tie the free end of the violet with white where it comes out of the harness. You don't want this shorting on anything![*]Strip the free end of the violet with white wire that's still connected to the fog light switch connector.[*]Strip a small section of the white wire that comes from the rear defog switch. DO NOT cut this wire, strip a section to make a splice. This is the third wire from the top.[*]Connect the stripped end of the violet with white wire to the white wire. Wrap tightly and solder. Tape and tie to prevent shorts.[/ol]
i can get you a pic of the harness but its not going to help since i havent done this mod.