Building on 05' motor for 99 2dr
#11
RE: Building on 05' motor for 99 2dr
ORIGINAL: I_Ride_Neon
This is what I am talking about http://www.campbellenterprises.com/n...ance_parts.htm
This is what I am talking about http://www.campbellenterprises.com/n...ance_parts.htm
#12
RE: Building on 05' motor for 99 2dr
ok so you are aware that 03 and up went to the new world motor that has different crank trigger and its located on the front of the motor instead of the back right... Witch means you will need to swap ever last wire from a 03 up neon for it to work... plus you will need the 58psi fuel pressure regulator... its not the same sohc thats in our 1st gens and will not work without the 03+ full wiring harness, and the ecu... or just MS it...
#14
RE: Building on 05'
ok let me retract a statement from above... The 03+ chrysler motors are not "new world motors." I should have said they have just said they have a different crank wheel pattern... and the sensor is located in a different spot. In addition you would also be able to run an external crank wheel and sensor... however it takes some damn good fab skills to do that...
#15
#16