As I hopped in my car to leave a store the other day my car did not want to go more than prob 1mph. Kinda bogging down etc..This lasted about a good half mile and then all of a sudden it drove fine again. My service engine soon light is on now.. This was 2 days ago and since then it has driven fine. Any ideas on what this could be?

 

Is ur car an automatic?

 

yes it is an automatic..

 

Try flashing out the codes, that will haelp a lot. I can't link it right now, but it is in the general help section OBD I

 

I get code 12. I don't know if this helps but that day it was extremely hot outside..

 

12 is usually the first code, and nothing to worry about. 55 should be the last code. Nothing in between?

 

Duh, LOL-- I get code 43..

 

code 43 multiple cylinder misfire detected. peak primary circuit current not acheived with the maximum dwell time.

 

Ok- So what should I do about that. Bring it in or keep driving it. It has driven fine since the one episode..

 

reset the pcm, unhook the negative battery cable and wait about 5 - 10 min before hooking back up, it will clear all codes and then you will be able to see if your code comes up again or if it was just a fluke.