Ok I realize that this topic has been posted many times berfore but I want to make sure that I know what I'm doing before I do it. First of all What exactly am I going to need such as wires, clamps, fuses ect... also Is there more that one way to do it. I dont really just want to get a smaller battery and cut the tray I want to do it right. I want to make my intake go to the front. I have checked the other posts and there is not really any Specific step by steps. Anyones info and or pics would be greatly greatly aprieated before I try to tackle this one
Thanks guys!!!!!

 

1)go down to a local hardware store pick up a Battery box (meant for Boating)
2)run a thick gauge wire from the engine bay to ur trunk (just like running wires for sound system)
3)get a 3 way distruber block...connect starter + wire, fuse box wire, and the wire u run to the back (all together)
4)put the starter ground to the body of the car (its a good idea to shave off some paint so the ground touches bare metal)
5)ground the battery in the back as well with a short piece of thick gauge wire

ps. there is nothing "wrong" about buying a tractor battery and trimming the stock tray.

 

will 2 guage wire work?

 

Yep, 0 to 4 is good.

 

anything else I will need 2 know

 

whats the price for one of those distributer boxes?/battery tray?

 

Don't know about the distributor, but the battery box should be less than $10.

 

where can you buy a distributer?

 

Im tryin to keep this project under $50

 

do you only have to run one wire to the trunk?