seats
#12
#13
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
swaping the hinge is more complicated than that. they are all sprung and in some spots tack welded. i took my passenger seat out a few months back thinking if i had no passenger seat my friends wouldnt wanna ride with me but as fate would have it, having no front passenger seat makes for a very comfortableback seat ( wich comes with a few extra advantages
).
![Wink](https://dodgeforum.com/forum/images/smilies/wink.gif)
#14
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
ORIGINAL: spudsterier
the couple door hinges into the srt4 seats????? how would he go about doing that??? what good would the door hinges do in the seats????
ORIGINAL: das2123
Thats what I am saying though. Swap the coupe door hinges into the front SRT-4 seats and he's all good.
Thats what I am saying though. Swap the coupe door hinges into the front SRT-4 seats and he's all good.
![EEK!](https://dodgeforum.com/forum/images/smilies/eek.gif)
ORIGINAL: Corprin
Items Needed;
10mm socket with wrench (3/8" drive or larger)
flat blade screwdriver
torx (can't remember what size)
outside seat back brackets from 1g coupe
Bracket Removal,
1. Remove plastic cover from seat back adjustment lever, with torx driver.
2. Use flat blade screwdriver to carefully unclip seat back cover clip and peel seat cover up and out of the way.
3. Using the 10mm ratchet, remove all four bolts attaching the stock bracket to seat bottom and back.
4. Bolt on 1g coupe bracket using the stock bolts
5. Replace seat back cover, slipping plastic release under seat cover (I didn't cut it, but you can) and clip on bottom of cover.
6. Replace plastic adjustment lever cover.
Items Needed;
10mm socket with wrench (3/8" drive or larger)
flat blade screwdriver
torx (can't remember what size)
outside seat back brackets from 1g coupe
Bracket Removal,
1. Remove plastic cover from seat back adjustment lever, with torx driver.
2. Use flat blade screwdriver to carefully unclip seat back cover clip and peel seat cover up and out of the way.
3. Using the 10mm ratchet, remove all four bolts attaching the stock bracket to seat bottom and back.
4. Bolt on 1g coupe bracket using the stock bolts
5. Replace seat back cover, slipping plastic release under seat cover (I didn't cut it, but you can) and clip on bottom of cover.
6. Replace plastic adjustment lever cover.
#16
#18