SRT-4 Swap Progress
#1
SRT-4 Swap Progress
Well, seeing as how the car I bought was not what I was expecting an the swap was done TOTALLY wrong, I decided I am putting it all into the R/T and use the one I bought as a donor car. I thought I would keep ya guys posted on progress and such. Most I have done thus far is totally strip out the donor car- I have some pics- and get it ready for the tow company. Thankfully this car had a good fender I could use for the R/T :-D so that made me kinda happy. Here are some pics!
Now THATS a slammed car....
Gutted... Had a STS in there :-D Thats a plus!
Mmmm 2.4L SRT-4 Turbo Engine- Only took an hour to pull, by myself!
My mess.... A mix of the R/T and the 96...
Now THATS a slammed car....
Gutted... Had a STS in there :-D Thats a plus!
Mmmm 2.4L SRT-4 Turbo Engine- Only took an hour to pull, by myself!
My mess.... A mix of the R/T and the 96...
#3
RE: SRT-4 Swap Progress
Yeah, space is becoming a real issue right now.. I sense that my roomate is getting kinda pissed that I am hogging the garage.. I promised her I would be done by like april, didnt seem to pleased with that haha, oh well though! I'm hoping to get the dash done, K-frame in and the suspension all finished over spring break, then I just have that lovely engine to put in, horray!
#4
RE: SRT-4 Swap Progress
thats cool,,i cant wait 2 see it finished,,,and let me know how tough it is to do,,i was planning to do the swap but i dont want to start something i cant finish,,,,,,lol,,,the only problem i have is that them 2.4s r a little pricey downmy way,,,,,anyway keep trucking and [sm=signs003.gif].
#7
Trending Topics
#8
RE: SRT-4 Swap Progress
I was thinking of swapping the dash, but I dont know.. I think I might just look at getting just the cluster to work... if I were to put the whole dash in, I would have to cut into my door panels and fiberglass them to make them look good.. I am kind of going for that stock look too. I love the stock R/Ts... I am currently hung up though, waiting on the title for the car I stripped- hoping its not STOLEN- that woudl not be cool,so I can get the tow company out here to flatbed it away... then get the R/T in there. I am not sure if I want the bodywork (Subframe straightened and the radiator support installed) done first or start installing things.. I would say the bodywork though....
#9
RE: SRT-4 Swap Progress
might want to clean the carpets while you have all the stuff out of there . . just a thought I shampoo mine about twice a year using the garden hose a scrub brush with a spray botthe of laundry detergent and some downy and a shopvac the downy makes it smell really nice then crack the window for a few days and your golden
and i also Might add that if you have a large air compressor and a long nozzle you can blast the carpets out with the air and then vac wear a resperator when doing this though it kicks up a lot of dust but does a way better job then just vaccuming alone. this takes about an hour and a half to do it well constant air then vac air then vac. worth it though saves about100$ in detail fees and you can also do the seats in the same mannor
and i also Might add that if you have a large air compressor and a long nozzle you can blast the carpets out with the air and then vac wear a resperator when doing this though it kicks up a lot of dust but does a way better job then just vaccuming alone. this takes about an hour and a half to do it well constant air then vac air then vac. worth it though saves about100$ in detail fees and you can also do the seats in the same mannor