When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
1st Gen Ram Tech'93 & older Rams: This section is for TECHNICAL discussions only, that involve 1993 Rams and older. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
I would like to see a pic of the lower control arm for $545. I am sure it's worth, it, I just have to justify to myself spending as much on the control arms as I spent to buy the whole truck.
What about the Ford and Chevy guys? Imports? It's a shame to run a business that way. Those guys could make a mint by selling quality products with excellent service. Instead he has chosen the path to the dark side.
I am taking the plunge Monday and ordering a set of dropcontrol armsfrom the man on here selling the bolt on lowering kit. I am also gonna order a set of uncut factory coils from him as well. I think that drop spindles factory uncut springs and drop control arms should be a nice setup.
Are your stock springs bad? Or are the ones he is selling a different spring rate? I am liking the idea of a Belltech Drop Spindle and one of his lower control arms to give me 4" of drop in the front. Then hangers and shackels in the back for another 4" there.
Are your stock springs bad? Or are the ones he is selling a different spring rate? I am liking the idea of a Belltech Drop Spindle and one of his lower control arms to give me 4" of drop in the front. Then hangers and shackels in the back for another 4" there.
My stock springs are probably tired and compressed. I am repalcing all of the bushings, balljoints, tie rods basically I am rebuilding the front suspension so I dont want to leave the old springs in it. Also if the springs are sagging than I will get more than a 4" drop and to be honest 4" is plenty in the front.
Are you wanting your truck to have alot of rake, the reason I ask is if you lower the front 4" and the rear 4" than the rear is going to set quite higher than the front.