lifting and finishing the dodge
Thread Starter
|
Registered User
Joined: Jun 2009
Posts: 41
Likes: 0
From: four oaks, nc
Alright just put the correct window in it took me all of about 10 min. with my kids help 10 min. and 3 try and we had it in. follow the instr. on fordmuscle.com search for installing back glass.
Thread Starter
|
Registered User
Joined: Jun 2009
Posts: 41
Likes: 0
From: four oaks, nc
HEY!!!!!!!!!!!!!!!! I've been seeing this post and like a nut ignored it let me tell you about that darn sway bar. the sway bar goes from the lower control arm (strut Rod) around the front of the truck to the same place in the opposite side. they are connected to the frame at the front of the truck by bushing and hardware the pics of this are hard to copy and paste but maybe Please select a corresponding number from the illustration below to view the details of that part.1) Stabilizer shaft2) Bushing kit Outer3) Stabilizer shaft Inner bushing4) Bracket To frame Upper Right5) Bracket To frame Lower6) Stabilizer shaft LinkDescriptionYearMSRP PriceCore PriceYour PriceLink - 2wd - 2wd
91-93 $46.20 $35.18
moparpartsamerica.com is the only place that I could find the pic and the parts maybe obsolete I have had a hard time trying to find any of the front end stuff that I really need. I bought my truck from a guy that hit a fire hydrant $350 and have almost brought back to life OH!!!!!!!!!! the bar shaft was $79 thoought u might want to know that make sure that it is in stock.
91-93 $46.20 $35.18
moparpartsamerica.com is the only place that I could find the pic and the parts maybe obsolete I have had a hard time trying to find any of the front end stuff that I really need. I bought my truck from a guy that hit a fire hydrant $350 and have almost brought back to life OH!!!!!!!!!! the bar shaft was $79 thoought u might want to know that make sure that it is in stock.
Thread Starter
|
Registered User
Joined: Jun 2009
Posts: 41
Likes: 0
From: four oaks, nc
well, like michael "this is it " I have enjoyed helping those of you that I have and I appreciate the help that some of you have given me I'll leave thread here so that other people can look and see maybe it'll help a little. Thanx everybody but, I think my project is over maybe I'll do more some time in the future. Thanx!!!!!!!!!!!!!!!!
Professional
Joined: Feb 2009
Posts: 229
Likes: 1
From: Mocksville,NC
well, like michael "this is it " I have enjoyed helping those of you that I have and I appreciate the help that some of you have given me I'll leave thread here so that other people can look and see maybe it'll help a little. Thanx everybody but, I think my project is over maybe I'll do more some time in the future. Thanx!!!!!!!!!!!!!!!!
Thread Starter
|
Registered User
Joined: Jun 2009
Posts: 41
Likes: 0
From: four oaks, nc
I got my rear bumper from a junk yard and the fron bumper no bumper guards from www.craigslist.com but you can try autopartswarehouse.com or ezbodyparts.com
Thread Starter
|
Registered User
Joined: Jun 2009
Posts: 41
Likes: 0
From: four oaks, nc
hey, this is a little off the subject but if you have any info or questions about a chinese quad go to www.chineseatvclub.com they can help
